How to tell the autorouter to stop routing pins that are already internally connected in the "part"?
I've seen lots of people ask more or less the same question, some even exactly my problem, but I haven't seen a solution or workaround.
I'd like to make a Raspberry Pi hat. The 2x20 pin connector that connects my hat's PCB to the Pi's GPIO connector has multiple pins on the same net. They are connected internally to the Pi, and I do NOT want to connect them also externally (to avoid ground loops and other nasties; arguing about the propriety of this is no help). Specifically, for example, pin 1 and pin 17 are both on the 3.3VDC net; they are already connected inside the Pi, and I do NOT want to duplicate this circuit by connecting the pins externally. Worse, I want to route traces in the area that the autorouter insists on blocking by routing a wholly unwanted track between these two pins.
I'm aware of this:
https://easyeda.com/forum/topic/Not-Connected-feature-for-unconnected-pads-in-Footprints-with-multuple-same-numbered-pads-on-PCB-03f61e1a8ed342b7a5be79e0dab765e5
Has it been fixed/added? Is there a workaround that I'm missing?
Thanks!
...R
#PCB#
Sign In Or Register Comment after
No comments yet. Be the first to comment!