https://www.lcsc.com/product-detail/WiFi-Modules_Espressif-Systems-ESP32-S3-WROOM-1-N16_C2913199.html

 

 

Hi I've made a simple schemaic for ESP32-s3 wroom and micro usb

But then I auto-route, and check DRC I get one line not connected (grounding pad under ESP32-S3) and vias around that pad don't have enough clearance.

 

Also microUSB

https://www.lcsc.com/product-detail/USB-Connectors_SHOU-HAN-MicroQTJ_C404968.html

These little plastic prongs that go into the board, also dont have the sufficient clearance from the metal side pads

 

these are the errors

I don't really know how to solve them. Can someone guide me how to fix the issues?

I'd prefer to have vias directly under the ground pads, so i could fill them with solder from the bottom side since I dont have a hot air station.

#PCB#
#PCB#
Circuit Design

No comments yet. Be the first to comment!