Hello all,
I am creating a PCB, that uses a LCM1602K-FL-YBW-33V33 LCD screen (Datasheet). I want to connect it to my PCB using male pin headers, but do not know how to do so. As you can see everything seems to be connected to the LCD screen, but I still need some pins, as the pcbs will be on top of each other :(


I have designed a circuit board, but I am uncertain about its functionality. Additionally, I am not familiar with other ways, so I hope someone can help me check it.
The functionality of this circuit board involves four interlocking circuits for inputs. In the top left, there are four input signal control lines that will receive DC24V. Below, there are four sets of input alternating current voltages: AC85V, AC106V, AC127V, and AC150V. On the top are one set of outputs, O1 and O2. The upper right provides voltage for the relay, and I have also used the voltage divider theorem to generate 5V for the logic gates of the integrated circuits.
The four interlocking circuits allow users to decide which set of input voltages to open for output. For example, selecting line 1 will output 85V, line 2 will output 106V, and so on. Originally, this circuit was designed using electromagnetic contactor(Shihlin Electric Magnetic Contactor S-P11) as the picture. All wire gauges are 18AWG, and the corresponding output numbers are 57 and 58.
I understand that checking a PCB is not an easy task, so regardless of the outcome, I appreciate you taking the time to read this inquiry.



schematics
https://mega.nz/file/sDF31KSQ#YWE9IxC8gxYoWZJBiyLrEfV2t5hBk3IdCN0r6ovu2Os
PCB
https://mega.nz/file/YX9UUaiD#XScezCgJECZSfxJR-K40BuvSANy3eqWH-tLKL8lCoZs
#PCB#
wire not connecting to pin of component, net port, or anything. I can rout a wire to a component, but it doesn't make a connection. I can place a component such as a capacitor over a wire and it doesn't connect. I can pick up the component and move it and the wires don't follow. it also generates net errors for them not being connected. this seems to only happen after working on the project for a while and making a bunch of edits and saves. eventually it starts generating Net errors and I can't fix them. previously when I got this error it was only on a single Net and I was able to fix it by deleting the Net and remaking it. now I have it on a dozen or more Nets and remaking it all would be very time consuming.
Unfortunately, I can't make this one public for all to see. so, if you have any ideas let me know. thanks.
PS: I don't know if it will work but I recorded a short video of the issue: https://youtu.be/NhFJ1wocq8I?si=w-ZmcUvX-6vBDhY8
#Schematic#










