I'm trying to modify the following PCB: https://easyeda.com/editor#id=99e39f80e22c4255bd61a7f4f1038f1c (https://oshwlab.com/DacoTaco/wii-bluetooth-pcb (Wii Bluetooth PCBv3))
It uses a USB connector from LCSC called U254-051T-4BH23-S2S but I'm trying to replace it with Amphenol 10118193-0001LF.
Can anybody help me? The footprint is similar but slightly different. It has the same pins so the routing should be the same but I can't figure out how to replace it?
I am looking at a build that requires either of the following parts:
https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/2-644861-8/698419
https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/3-644486-2/698410
My question, is there a way to import schematics & 3D models or do you have to use the ones provided by EasyEDA via either jlcpcb or lcsc?
Hi,
I'm very, very new to making this kind of thing (electronics and boards). And still trying to make my first project. Tried another softwares and end by trying EasyEDA.
I am stuck on what seems a common problem. I made all my schematic (according to what I learned), but when I went to see the board, I got a lot of Incomplete Network errors.
recreate
I searched a lot but all help I foud did not help. I tried to redo some connections, rotate or redo bus entry, recreate BUS and also assing some network labels, etc... nothing works.
It seems something related to how I connect things on a BUS. But I tried everything and I'm not getting what I'm doing wrong.
Could somebody see the schematics and point me the right direction ? It's small and very simple. Thanks !!
The project is here: https://oshwlab.com/alexantao/focalizador-servomotor










