Via connectivity is seriously broken in 4 (and maybe more than 4) layer boards with planes.

@UserSupport,

Via connectivity is seriously broken in 4 (and maybe more than 4) layer boards with planes.

Referencing this projects:

https://oshwlab.com/srivad/test-project

As these images show,

  1. Vias that should be connected to the 3.3V plane are not
  2. The GND vias are connected to both the GND and the 3.3V planes!

image.png

image.png

Also note:
3. When routing and then pressing the 2 key a warning that changing layers to a plane layer is issued in the lower right hand corner.
    But, when routing and then pressing the 3 key no warning is issued.

4. When first creating a new 4L PCB\, a spurious GND ratline appears to the lower right corner of the board outline:

image.png

#Bug Reports#
Bug Reports
Ratlines that are supposed to disappear but are not in 4L board?

Hi,

I have here a very simple example with the following: (https://oshwlab.com/project/publish/77e48a82dcc04184b93db18f7a3ae015#):
1. 4 layer board with L1=GND and L2=V3.3 (as planes with the expectation that it will start off as all copper)
2. A battery (with V3.3 and GND) and resistor (connected to V3.3 and GND)
3. The battery and resistor connected to vias with appropriate net names

Expectation:
All ratlines should disappear

Actual:
Only the GND ratlines are gone.  The V3.3 ones still remain.

What am I doing wrong?

Thank you

#PCB#
Circuit Design
3D import File support

HI,
Does anyone know when Easy Eda will be introducing more support for importing 3D libraries?
Right now the only import is DXF and I have yet to be successful in importing anything with this format.
It looks like the most common format supported is STEP.
I did ask a
dillon@easyeda.com, and he stated 'you need to convert STEP to OBJ file to import
the next big version can support input step and export step. maybe a few months later'



Not heard from him since, can anyone shed any light on this?
Thanks






#PCB#
Circuit Design