Tapped transformer secondary phases are wrong: please correct spice pin numbering of US symbols only.

Update: 200529. See end of Bug Report.

As reported in:

https://easyeda.com/forum/topic/Phase-problem-with-Transformer-Centr-Tapped-US-Mutual-Inductor2-US-1106de1adb2b4f59aaa64cfef40e87df

the phasing of the secondaries in:

image.png

and:

image.png

are wrong.

To correct this, please swap the spice pin numbering of pins 3 and 5 on the symbols as shown below:

  • Spice pin number of pin 3 must be changed to 5
  • Spice pin number of pin 5 must be changed to 3

I can't change this because i do not have access to the EELib symbols library

Update
The EU version of the centre tapped DC transformer is OK but the EU version of the Mutual Inductors centre tapped transformer is also broken and both EU and US single primary, single secondary mutual inductor transformers have lost their models!

The easiest way to correct the US Tapped transformer is still to swap the spice pin numbering of pins 3 and 5 on the symbol as shown below:

  • Spice pin number of pin 3 must be changed to 5
  • Spice pin number of pin 5 must be changed to 3

Both Mutual inductor transformers were originally written for Ngspice can now be rewritten more efficiently in LTspice.

Here are two new netlists for the Mutual inductor transformers but you will have to do whatever is required to add the parameterisation though the UI.

This is the subckt netlist for the EU and US single primary and single secondary mutual inductors transformer. It includes showing how the spice pin numbering must map to the symbol pin numbers:

************************************************************************
* Symbol pins numbered anti-clockwise from top left:
*                                1        2         3        4
.SUBCKT Mutual_Inductors2_XT1 pri_dot pri_nodot sec_nodot sec_dot
* signality.co.uk 200529
**
L1 pri_nodot pri_dot 1m Rser=1u
L2 sec_nodot sec_dot 2m Rser=1u
K L1 L2
.ENDS
************************************************************************

and for the EU and US single primary, centre tapped secondary mutual inductor transformers. It includes showing how the spice pin numbering must map to the symbol pin numbers:

************************************************************************
* Symbol pins numbered anti-clockwise from top left:
*                                1        2         3        4      5
.SUBCKT Mutual_Inductors2_XT1 pri_dot pri_nodot sec_nodot sec_ct sec_dot
* signality.co.uk 200529
**
L1 pri_nodot pri_dot 1m Rser=1u
L2 sec_ct sec_dot 2m Rser=1u
L3 sec_nodot sec_ct 3m Rser=1u
K L1 L2 L3
.ENDS
************************************************************************
#Bug Reports#
Bug Reports
New user with Gerber issues

I am a new user.  I have never built a PCB.  I have used various schematic capture systems and then built boards using wire wrap technology.
The project is a two board system that allows a 7 segment display module of either 3 or 5 digits to plug into a mother board that holds a MAX7219
7 segment decoder driver serial interface chip.
The schematic capture portion worked great.  I had a couple of new user issues but worked through them and have a successful schematic for two of the
three boards in the system.
The PCB layout was also successful in that I have two of the three boards that look good.
DRC doesn't return any errors.
I cam export the BOM
Gerber files generate and I can open them all.
The issue is that both of the drill files, plated holes and non plated holes has a list of errors in it.
I watched all the Tutorial videos, read all the text tutorials and did not find anything that would lead me to what is wrong.
All the hole dimensions seem reasonable.  I even designed a very simple circuit using components from the standard EasyEDA libraries.  I used a 7400n quad chip, a LED, and a resistor
This also failed with  Gerber drill file errors.
I made both of the boards public.  I will need to get the path to those two boards which I will do forthwith.  I also need to get a couple lines of error message out of the drill files for y'all.  Gerber-View would not let me copy content of the file so I will do it manually.
Daughter Board:
https://easyeda.com/whitehedr/daughter-board-3-digit
https://easyeda.com/editor#id=|44e04adaf2dc449181027bf2d2b4dadd|6d66e7b3c80547f18c35caf1d68a9bf0

Mother board links:
https://easyeda.com/whitehedr/mother-board-mcp-7seg-disp
https://easyeda.com/editor#id=|0a176ef2744a40639021ff2c6305203f|c6c4dc379acf46fab4069d3ea5627c72

Gerber Drill file errors:
Unexpected char 0x3 < <
Unexpected char 0x4C

#PCB#
Circuit Design