Hi Team, forgive me for asking some basic questions…I am really enjoying EasyEda, I tried several other similar
programs and this is by far the easiest to use for drawing circuits.
However I am trying to run a simulation for the first time
and I am in new territory and lost.
My first problem is that I am getting an error message…"There
are some parts haven't spice model, please use EElib and "Spice Symol" at Libraries of
"Simulation" mode or you can assign the spice model for them"
I have used due diligence and searched and found another
person who had the same problem…
https://easyeda.com/forum/topic/How-to-find-model-with-Spice-Simulation-d347036f71154200a6cb5d5c460363f7
However this has only made me more confused, because every
component I used was used from the menus on easyeda… so I really don’t
understand why I am having this problem (they should all be spice models
already?) I also don’t understand what it is asking me to do exactly,
and I also don’t understand how to figure out which component doesn’t have a
spice model.The more research I do the more I am going round in circles.
I also have a second
question regarding this document…https://docs.easyeda.com/en/Simulation/Spice-Simulation/index.htmlIt says “Your circuits must have a GND net.” My question is should I interpret that to mean that I need
to physically draw a ground loop between all of the grounds? Again I have used due diligence by searching for definitions
for “ground net”, I saw lots of mentions… but no definition.
Hi,
I am trying to get a plot of the gain to see if it does get to 200 amplication per this source: https://www.circuitbasics.com/build-a-great-sounding-audio-amplifier-with-bass-boost-from-the-lm386/.
How can I generate such Gain plot using the Simulation menu?
Thank You
#Simulation#Hi,
I'm making a triple output dc-dc power supply using the schematics from here. I'm aiming for the following specifications:
5V 12a
3.3v 12a
12v 2a
I have pots to adjust the voltages += 10% because the hardware it's for is supposedly very finnicky with voltages.
First off, I'd just like to ask if the circuit makes sense? is there anything obvious I'm missing here?
I've never created a circuit with such high current before, I've done my research on track width, expansion, heatsinks etc. But I thought I'd just try and simulate the circuit, however the 6A4 diode in the spice symbol library seems to be broken (this one). Could someone possibly upload a diode that works?
Also, is there a simple way to simulate load as part of the simulation?
#Simulation#

