EasyEDA BoM parsing error also breaks the JLCPCB SMT assembly BoM processing.

Nexperia have some part numbers that have two parts to them separated by a comma.

This causes a parsing error in the BoM creation tool and breaks the JLCPCB SMT assembly BoM processing.

Below is a demonstration from this user post:

https://easyeda.com/forum/topic/Why-can-t-I-get-the-LED-assembled-dangerous-bug-no-warning-9e578bef1a904506b22d2b0e3e8ce327

For example this is what happens when the Nexperia part "74HC595D, 118" is listed in the BoM:

The original part number field of “74HC595D, 118” has been parsed incorrectly by the BoM creation tool and it has been split into two fields:

“74HC595D" and "118”

and this has messed up all the following fields by pushing them one - and then further right where the same parsing error has occurred again; two - columns to the right. This has then also messed up the parsing of the Designator field contents of "U1, U2" by splitting that into two separate fields:

"U1" and "U2"

So the whole row in the BoM is broken because the column contents no longer represent the correct information fields:
image.png

#Bug Reports#
Bug Reports
Export EasyEDA PCB designs into a 2D or 3D CAD package.

To be able to export EasyEDA PCB designs into a 2D or 3D CAD package.

Several users have suggested AutoDesk Fusion but also please be aware that an alternative would be to be able to port EasyEDA PCB designs into FreeCAD.

  • Why FreeCAD?

Because FreeCAD is a FOSS package whereas Fusion is proprietary and is only free for educational and personal, non-commercial use.

Exporting to Fusion would appear to require conversion of EasyEDA PCB designs to EAGLE as an intermediate step which will almost certainly lead to further issues. Exporting to FreeCAD may be a smoother, less error prone process.

#Feature Requests#
Feature Requests
Project folders for multi-board hardware projects

Hi,
I have been using EasyEDA for about a year, and it's a great circuit design tool, with all stages of design in one place, and a bunch of other features which I seem to be blanking on right now, but there's something that's been bothering me: When you have a project which needs multiple boards, you either use multiple projects, or you do what I've been doing for the last 3 months: Keep note of which sheets belong on which boards, and for each board delete every component that isn't on those sheets. (I select everything on a given sheet, move it out of the way, then when I'm done delete the original block of components, to work faster.)
Going back to the multiple projects thing, which started about 8 months ago when I tried making my own Cube-Sat, I had different projects for each board, but it was fairly cumbersome to find them short of pinning them, which causes problems when you try to work on other projects. So, my suggestion is to add folders to store multiple projects in, like {Cube-Sat} -> {Power Supply Board, Processor Board, Radio Board, ...}. This is particularly relevant now as I've started another multi-board project: A 14-bit calculator with a decimal keypad input and decimal output, signed, with addition, subtraction, multiplication (provided each number is under 128), and a memory function (store, recall, clear, add ACC to MEM, subtract ACC from MEM). I tried this in ExpressPCB, where multi-page schematics fit into a single file, but PCB routing was a bit confusing since there was no rats-nest layer.
And now thinking about what I've just been talking about, I realize there's technically two ways to solve this problem: Either add the project folders, as I was talking about, or make each schematic take a single file in the project manager, and have new PCBs use only one of those files.
~ Wesley

#Feature Requests#
Feature Requests