EasyEDA component library: Inconsistent results for JLCPCB SMT Assembly - Basic-parts not visible

I've noticed recently that SMT components listed by JLCPCB as available for basic assembly show up differently in EasyEDA Component Library.

Searching here: https://jlcpcb.com/client/index.html#/parts for "10uF" I can see this part https://lcsc.com/product-detail/Multilayer-Ceramic-Capacitors-MLCC-SMD-SMT_SAMSUNG_CL21A106KAYNNNE_10uF-106-10-25V_C15850.html/?href=jlc-SMT is listed as Basic, and 2357131 parts in stock - this is a good part to use for JLCPCB Assembly...

In the last few days, if you searched for this product in EasyEDA Component Library, using the LCSC part number, "C15850", or the manufacturer part number, "CL21A106KAYNNNE", you could see the part listed but with stock of 0... not 2357131...

Currently, if I search for that same part using either of those IDs, it is no longer available under LCSL or JLCBPC Assembled.

Currently if I search for "10uF" in EasyEDA Component Library - there are NO components listed as Basic under _JLCBPC Assembled. _How is that possible? 10uF is a very basic and common component...

How can we design boards for JLCPCB trying to target SMT assembly for most / all components if they do not show up in EasyEDA or we can't trust the data / stock levels?

#PCB#
PCB
Add Pad Number attribute to Vias

In the post below I describe away to avoid DRC errors created when placing thermal vias in a pad.post:

https://easyeda.com/forum/topic/How-to-place-multiple-vias-in-a-PCB-footprint-a34cf68d58414138898a56de60abd8c1

If the thermal pads are required to have a solid connection to surrounding copper on other layers then the way to deal with this is to set the main pad (within which the multi-layer thermal pads have been placed) to be a multi-layer pad.

Then, if spoked connections to the surrounding copper are required, the pad within which the thermal pads are placed will be connected by spokes but will ovelap any spokes formed around the thermal pads.

One point to be careful of is that if the thermal pads are placed too close to the edge of the main pad then the cutouts between the normally hidden spokes for each each thermal pad will be visible around the edge of the main pad making it look like the perforations around a postage stamp.

However a much simpler solution to all of these issues would be to add a Pad Number attribute to Vias but to still inhibit the formation of spokes around them.

#Feature Requests#
Feature Requests
Can't create new track between contacts / Не могу создать дорожку между двумя контактами

The main problem is shown here  https://youtu.be/qTaIs5CYQ0k but on Russian
I try to create manually new track between contacts each already has a connection (thin blue line - TBL)
But it's not possible
Also, I can create a new track from contact without TBL

#Schematic#
Circuit Design