SMT assembly rotation

My question is a bit of a follow up to: https://easyeda.com/forum/topic/SMT-Assembly-Wrong-components-placement-a8d4fb943cf340eeb9309faca7340b23

I need confirmation that my components will be installed the correct way, given that the preview places them in the wrong orientation.

I know the previewer says that "reference only" but I need some assurances that my board will be assembled correctly. I used easyeda to create schematics, and parts from LCSC (with their associated pcblib) to create that pcb layout.

Untitled.png

#PCB#
PCB
Invalid PCB

Hi,

I've run into a problem with the Auto-Router not wanting to route my PCBs and have tried several things to get an idea of where the problem be but the error only says "Invalid PCB" and provides no other details.

On a new project ( https://easyeda.com/jogra27/rob08-2019, https://easyeda.com/editor#id=|1efb188a0f684e2990335294c224cea5|dc3b7e3da87d4b9cacd177ce2a5c9458 ) I found that when I went to Auto Router I got an error "Invalid PCB" after pressing the run button on the "Auto Router Config" dialog box.
Things that I have tried:

  • Cloud router
  • Local router v0.4
  • Latest local router V0.8.10
  • Different Arduino Boundary Outline

I then went to a project that was auto-routed a year ago (https://easyeda.com/Bentley2018/Arduino-Vehicle, https://easyeda.com/editor#id=|9fdb3607968d4f6bba69d804c27ac139|fcddf29f4e9740f29b32dd96674678d5|ba17f10e355a498889e4dd45395b30eb) and cloned the previously created PCB and when running the Auto-Router got the same error.

I searched the forum looking for something else that I might try but have not found anything that would suggest why I can not longer autoroute these PCBs.

Could you please suggest what I should do.

Regards John

#PCB#
Circuit Design
JLCPCB SMT Assembly problems

I've laid out a schematic and PCB ensuring most parts are from JLCSMT Parts Library But when I create the BOM, only two parts have "LCSC Assembly" = Yes. See screen grab.

So only those two parts will be assembled onto the PCB. Do I need to manually edit the BOM to fix this? What exactly do I need to do?

Capture.gif

#PCB#
PCB