2 outlines on same PCB

Hi,
I am trying to find out how to design 2 boards on the same PCB.
The most topics are outdated (or with invalid links, like
https://easyeda.com/Doc/Tutorial/PCBOrderFAQ#Different-Design-in-Panel)

I designed something and want to stack 2 boards, so instead of design a 8cm x 4cm board, I designed 2 boards with a size 4cm x 4cm.

easyeda.jpg

Solution 1:
Can I panelize a 2 x 1 board and insert 2 different designs on it? Or is this still not possible?

Solution 2:
Can I draw 2 outlines with the same size?

Solution 3:
Can I draw an outline line inside my PCB and this will be cut?

Solution 4:
V-Cut, but still can't find how to draw this cut with the current EasyEDA version.

Solution 5:
There is still no solution, I have to select 2 different designs on the order and pay more.

#PCB#
Circuit Design
How to connect pins with a custom-designed ground plane

https://easyeda.com/editor#id=|0b799f88e57d47d5a6120e735fa5a29b

In this PCB layout, I have an SMA connector and a custom-designed ground plane. The 4 outer pins of the SMA connector should be connected to the ground plane. Although I named the 4 pins and the ground plane with the same name "GND", they don't look like connected in the editor. Could anyone give some advice on this problem? Thanks!
image.png

#PCB#
Circuit Design
Ratlines are incorrect and don't follow schematic

Project: https://easyeda.com/tomsemail2100/boost-converter

I don't know why this is but when I convert the schematic to the PCB the ratlines are different from the wiring, such as on the led both ratlines go to one end of it.

#PCB#
Circuit Design