Hello,
In the Order details of JLCPCB they said: Shipped on: [2018-10-19 07:47:03](javascript:void(0);)
But I still can´t track the order in https://www.17track.net/en in which it appears as "Not found - Info unavailable, we can't identify your number yet"
Also in their webpage, the Shipment Tracking of the Order says: "2018-10-19 21:35:23 Shipment arrived at facility and measured."
I ordered with DHL HK
Is that normal?
Thanks
#PCB#Hello,
If you make a design with four layers and assign one of the internals layers to "plane" and then switch back to 2 layers, gerber file will be generated keeping the internal layers.
The workaround is to go back to 4 layers and then reassign the internals layers to "signal". Then switch back again to 2 layers design and the gerber file will be OK.
I'm using easyeda v5.8.19. Project https://easyeda.com/editor#id=5beb49316b7e4df7824a2e0a76c26a5e|2c02ef9146da4346b689837c227cda4e demonstrate this.
Regards.
#Bug Reports#I have be been experimenting with the LM393 to trigger a LED when my charger is connected to a battery pack on my Baofeng radio.
The pack is dual 18650 at 8.4v and a charger module XL4015 which i connect to the pack.
I have battery level indicator built into the pack with press button to show it.
Ive tried one circuit that the led come on at 8,4v exactly, but it never drops out correctly, 8.35 drop out would be ideal, such as when the charger cable is disconnected.
https://easyeda.com/pattang2018/lm393-charging-indicator




