I have a package that I created (Link) that includes a number of polyline pads.
The pads were originally oval shaped and multilayer, but I changed them to polyline because of the shape I required. When they were an oval shape they worked as expected.
I changed them to be just top and bottom layers instead of multilayer to see if that fixed the problem but it didn't change.
Here is the package inserted into a PCB. You can see that there is no pad connection to any of the copper net layers, there is only a ratline.
I can obviously manually create the connection, im just confused as to why it's not creating the connection automatically.

Link to design: https://easyeda.com/geekness/Pixhawk_2_1_Carrier_Board-867b867dffb64c5ea3d487b449e04cad
Hopefully somebody can give some advice on what to change here.
#PCB#Hi guys,
I created a Dockerfile to run the autorouter locally to make it easier for end-users to run it.
The dockerfile installs all the required packages for java.
It would be cool to to have a stable URL where the Dockerfile could download the latest version of the autorouter zip file.
Currently it is: https://image.easyeda.com/files/EasyEDA-Router-v0.7.7z
but tomorrow it could be https://image.easyeda.com/files/EasyEDA-Router-vX.Y.z
I would like to have a stable URL like: https://image.easyeda.com/files/EasyEDA-Router-latest.7z
Thanks in advanced!
I will of course share the Dockerfile with you: https://github.com/SIGSEGV111/EasyEDA-AutoRouter
Regards
Simon
Hi,
How can I make a circular pattern of vias along the edge of a PCB?
Like this:
https://imgur.com/a/ksXrOhU
Distribute array does not seems to be working.
And how can I remove the solder mask selectively around the pcb?
Showed by the blue circle.
[https://imgur.com/a/rrDIBmO](remove solder mask)
Hi,
Im having some trouble with a board im designing.
It's a 3 layer board, with 2 gnd layers and one that carries +ve voltage.
There are a number of packages made up of multilayer pads and vias. Each one is associated with a net. It's these packages that im having troubles with.
If a pad is associated with (example BATT_IN) the connection to the BATT_IN layer will connect as expected\, but the layer where the pad is at GND\, it will route a track to a different BATT_IN pad.
I would expect that the vias actually connect the different layers of the pad, and then not require the track to be routed. How do I fix this?
Here is a link to my PCB project.
https://easyeda.com/editor#id=|47a9e074256745c98c909c70f330e86a|1cd3b05145e84996aecbcfdae4e2a336
Hi all.
I am trying to create the PCB package for an Allegro ACS758KCB-150U-PFF-T
Here is a link to my package: ACS758KCB-150U-PFF-T
It has 2 large oval shape pads that nearly touch each other, except there is a a small flat spot on the curved part of each oval.
It's these flat spots im having trouble creating.

Hopefully somebody can help me figure it out.
#PCB#













