Hi,
I am creating a package for allwinner H3.
But I don't quite understand the pin detail
Datasheet:
H3 datasheet
See the last page.
The pin pad should be 0.15mm but there is also the 0.08mm value.
I see that the numbers may be rounded at two decimals, hence 0.15/2= 0.075 rounded at 0.08mm. But what is this value meaning?
Thanks!
#PCB#BUG
Concise problem statement:
Adding extra parameters to symbols in the schematic which then appear in the BoM works OK but it does not when you do the same thing to the PCB.
Steps to reproduce bug:
The problem is demonstrated in:
https://easyeda.com/andyfierman/BoM_directly_from_PCB-c57c9a4ba5284343b6e8029b68993115
Results:
Some added parameters appear in the BoM, others do not.
Expected results:
Adding extra parameters to packages in the PCB should then appear in the BoM in the same way it does when you add extra parameters to symbols in a schematic.
Browser:
#Bug Reports#I've had no issues running simulations in the past, but for some reason today I can't get this one to work correctly:
https://easyeda.com/hsetlik/pulse_source-958a183e1b7e492caeba48c177a14928
I don't get any error message and the WaveForm window opens up when I run the simulation, but the window is totally empty; as in I don't see a grid or anything, just a blank white page. Any insight as to what's going on here is greatly appreciated.
#Simulation#This really simple circuit gives only a blank waveform page as simulation result. It has a GND and a voltage probe but I simply get nothing. Any clue why this is not working?
https://easyeda.com/editor#id=9ec2467445b643e29e279815d9df05cb|d9b0990cb1c345678ef9b4c94c9fa430
#Simulation#