BUG
Concise problem statement:
Logical inversion using tilde ~ character does not work because ~ placed in netlist text in schematic canvas is ignored and does not appear in spice netlist.
Steps to reproduce bug:
Running this netlist in ngpsice.com (release 26) with
the tilde in:
ainv1 ~ind outd buff
inverts the input OK.
Removing the tilde so that line becomes:
ainv1 ind outd buff
and inserting one into:
aoutbridge1 [~outd] [out] dac
then that inverts the input OK too.
However, running this netlist in EasyEDA, then the tilde
is ignored in either location.
- This appears to be a bug in EasyEDA.
This is the example shared on ngspice.com:
http://www.ngspice.com/index.php?public_circuit=CFHOrs
Results:
Logical inversion using tilde ~ character does not work because ~ placed in netlist text in schematic canvas is ignored and does not appear in spice netlist.
Expected results:
Placing ~ in front of a digital input signal should create a logical inversion of that input.
Url:
https://easyeda.com/editor#id=XxqICUAS0
Browser: Chrome in Kubuntu 12.04 LTS.
#Bug Reports#BUG
Concise problem statement:
When a new symbol is created by a user double clicking on an EasyEDA Libs symbol, editing it ans saving it, the part number still shows the original EasyEDA Libs part number and not the new user part number.
I have known about this problem for a while but have only just made time to write a bug report about it now because it has now been encountered by a user:
https://easyeda.com/bbs_view_1915.htm
I created a zener diode (1N5221B), using the zener diode symbol from the EasyEDA Library. I followed the above procedure exactly with no evident problems, but when I place it in a schematic, it has the part number of the default zener: BZT52C10. It's a simple matter to edit the part number and the device simulates as expected (or will, once I finish tweaking the model) -- I just wondered if persistence of the default part name is expected. There was no such problem with the new generic mosfet symbols.
The new generic mosfet symbols referred to above are these:
GENERIC SPICE .SUBCKT NMOSFET symbol (Enhancement)
GENERIC SPICE .SUBCKT PMOSFET symbol (Enhancement)
GENERIC SPICE .MODEL NMOSFET symbol (Enhancement)
GENERIC SPICE .MODEL PMOSFET symbol (Enhancement)
I created these symbols to avoid this exact problem. They can be found with SHIFT+F.
The problem seems to be that the Model'<name>' part of:
{"head":"7~1.9.1~400~300~package`SOD123`name`Zener`pre`D?`spicePre`X`nameAlias`Model`Model`BZT52C10`
the EasyEDA Source file is not being updated when the user edits the Model name in the symbol Editor.
My reply to this user (see below) describes a workaround but I think the user should not have to do this so I am reporting this as a bug.
I think you may have found a small bug in the symbol editing process.
Could I ask you to post this as a Bug Report please?
The part number persistence can be corrected by editing the EasyEDA Source file for the new spice symbol but it is a bit messy and the user should not have to do it this way.
Here's how you can fix it in the EasyEDA Source:
Document > EasyEDA Source
opens the EasyEDA Source window.
This is what the EasyEDA Source code (JSON) is for the zener symbol from the EasyEDA Libs:
{"head":"7~1.9.1~400~300~package`SOD123`name`Zener`pre`D?`spicePre`X`nameAlias`Model`Model`BZT52C10`","canvas":"CA~1021~621~#FFFFFF~yes~black~10~1021~621~line~1~pixel~0.5","shape":["P~show~0~1~380~300~180~gge1^^380~300^^M 380 300 h 15~#880000^^0~398~303~0~A~start~~^^0~389~299~0~+~end~~^^0~392~300^^","P~show~0~2~420~300~0~gge2^^420~300^^M 420 300 h -15~#880000^^0~402~303~0~K~end~~^^0~411~299~0~-~start~~^^0~408~300^^","PL~410 309 406 305 406 295 402 291~#880000~1~0~none~gge4","PT~M 395 306 L 405 300 L 395 293 Z~#880000~1~0~#880000~gge6"],"annotation":[],"BBox":{"x":378,"y":291,"width":44,"height":18}}
Where it says:
name`Zener`
your code will probably have your new subckt name but where it says:
Model`BZT52C10`
your code will probably still say:
Model`BZT52C10`
This is why your symbol still shows the default name of BZT52C10 in the schematic.
To correct this, edit the Model reference to your new subckt name.
For example: if your subckt is BZX84_C3V0_NXP, then the name reference should say:
name`BZX84_C3V0_NXP`
and the Model reference should therefore be changed to:
Model`BZX84_C3V0_NXP`
(Note that the user did not create a bug report so here is one from me.)
:)
#Bug Reports#Feature Request
Brief title for your desired feature:
To be able to plot one signal on the Y axis against another on the X axis.
How would you like the feature to work?
To be able to specify a argument for the X axis. At present the X axis is determined only by the type of analysis requested (i.e. the swept variable in a DC Sweep, time in a transient analysis or frequency in an AC analysis).
Why is this feature important to you?
This was asked about in:
https://easyeda.com/bbs_view_1980.htm
so I thought I'd raise it as a feature request so it did not get lost.
:)
#Feature Requests#BUG
Concise problem statement:
Following on from bug report:
https://easyeda.com/bbs_view_1968.htm
it has been discovered that after saving the schematic and reopening it, the tilde character ~ has been stripped out of the text netlist in the schematic!
Steps to reproduce bug:
-
Add
~character where indicated. -
Save schematic.
-
Close schematic.
-
Reopen schematic.
Results: ~ character has been stripped out of text!
Expected results: Text should be unchanged from save to reopen.
Url:
https://easyeda.com/editor#id=XxqICUAS0
Browser: Chrome, Firefox in Kubuntu 12.04 LTS.
#Bug Reports#Hello there,
long time no see!
Here's my situation. I have two parts, with roughly 12 tracks connecting them. Problem is, I realize I have to move one of the parts.
I can't find an elegant way of accomplishing this without painstakingly recreating the tracks, or moving individual vertices, etc.
I feel there should be a way to accomplish this where EasyEDA allows me to select the part, and only a section of the tracks so they could move together. See pic here to see what I'm talking about:
http://i.imgur.com/NlOVDe0.png
I want to move the highlighted part to the left. Oh no! I have to deal with all the tracks. Painful!
...and I rtfm'ed this time, maybe I just missed it :-)
#PCB#