Hi,
In EasyEDA Pro, when having a copper region in the PCB with "Optimization" property set to "Yes", generating a PDF will not have the copper plane correctly printed.
Here is a screenshot, in the PDF there is void between the copper region and the silkscreen yellow rectangle:

With copper region with "Optimization" set to No, there is no issue, the PDF match the EasyEDA PCB view.
Here is an example project: https://oshwlab.com/amubtdx/test_pcb_pdf_export_copper_region
Here is the full exported PCB PDF page:

My EasyEDA Pro version is:
Version : V2.1.49.1.de255bc8.674264
BuiltDate : 2024-02-19
I have very little idea what I'm doing, this is the first PCB I have tried to route
https://easyeda.com/editor#id=66b8c85af07f4692a35f1eda57a2a01f
I want to connect the GND pins of the ESP32-S3 to the ground plane & also the ground pins of the encoders & Microbus header. How do I do that?
#PCB#Just want to thank you guys for listening to all the requests and creating such a well thought out feature, it works perfectly and the manual is easy to understand.
For any users reading this I am talking about EasyEDA pro's reuse layout feature. If you have the same circuit many times in your schematic you can just layout on the PCB side one time now!
entrance:Top menu - Layout - Reuse layout routing
or you can find it under group if you right click.
Instructions can be found: https://prodocs.easyeda.com/en/pcb/layout-group/index.html
under the multipex layout section
#PCB#














