Show net names in schematic editor

This is so obvious I cannot believe this feature does not exist, but all my research finds no way to do it.

Request: When a net is selected in the schematic editor, show the name(s) of that net somewhere in the UI (properties panel for the selected wire would be an obvious place). If there are multiple names, show all of them.

From what I can tell, there is NO WAY to find the name of a network in the schematic unless (1) there is a user-created Port label, or (2) you select it in the Design Manager and it is highlighted. If you don't know the (generated) name it is impossible to find it in Design Manager without clicking on every single net which is not practical for large designs.

Here is just one scenario where this is needed:

I am auto-routing a PCB and I want to use the "Skip Nets" feature to prevent auto-routing of certain nets. There is a drop-list of net names to choose from for skipping:
image.png
Obviously I know exactly what net in the schematic I want to skip routing, but I have no idea what the generated name is. So I have to dismiss the Auto Router Config dialog and find one of the components connected to the net of interest, and see the net name on the PCB. Now I re-open the Auto Router Config and choose that net to skip. Then I do that again for the next one I want to skip. It is absurd.

I don't care where or how (tooltip, properties panel, whatever) but make some way to easily show the name of a selected net in the schematic editor.

#Schematic#
Circuit Design
How to DRC/set minimum solder mask to copper area?

JLC are telling us that flex pcbs need min 0.15mm soldermask opening.  This is not written on the capabilities page anywhere in the english version (chinese refs it a bit, https://www.jlc.com/portal/vtechnology.html ).

I can't see how it would be checked on easyeda pro with DRC settings.  Note - this is different to soldermask expansion - I am talking about soldermask opening - as shown by green arrow below.
 image.png.





Ideas?  Thanks all!

#PCB#
Circuit Design
A warning on "Part no longer manufactured" on JLCPCB parts

I recently tried to use a part but it was marked as "No longer manufactured" on the JLCPCB parts list, which I knew not to be the case.  So I contacted customer support and their reply indicates they agree this isn't that accurate a description, just that they had problems purchasing the part.  So don't always assume a part is obsolete as I now realise I have done several times in the past.

Full reply below for those interested :

Good day! Thanks for your kind feedback.

It
is kind of misleading since customers may think as the parts are
unavailable at the manufacturer end forever. But it is okay any problems
you have, you are welcomed to contact us, we will make the explanations
for you.
And
the parts that marked as ''Discontinued'' in the JLCPCB, it is because
we met problems with buying that part from the supplier and we are told
that there is no stock by our Channel sourcing. It means we could not
source them, not all parts could not be sourced from the market. Thanks
for your understanding! But we are trying best to source the parts for
our customers and for more convenient to place the assembly orders!
Also
we support many ways to source the parts for our customers, excepting
form the global sourcing parts we mentioned on our last email, we also
support submit new parts request and consign parts functions.
1.For the part marked as "No longer manufactured", if it could not be found in the global sourcing parts, you can still submit a new part request in the global sourcing parts page, and we will review your request if review passed we will buy it for you from the overseas suppliers.

#SMT#
SMT Components
LCSC catalog not working

can't place 0 ohm resistor because easyeda library returns "no result".

lcsc part C3017103 but also mfr part SCR1206F0R



also for C5146167 and other , search engine seems to be broken....

#Bug Reports#
Bug Reports
Pad to hole clearance?

What is the minimum distance between a hole (square, unplated) and a pad that I can define?

I want to do something similar to what can be seen in this image:

https://camo.githubusercontent.com/11a3fb5964ee7d595585649ae5bb57ee589108c14e146d1ee2f443b6576173dd/68747470733a2f2f692e696d6775722e636f6d2f6f6d55593061632e6a70673f32

 

This is currently my footprint in KiCAD, the square in the middle is a hole and I'm wonder how close I place the little red pads to it.

3D render shows better what I'm trying to do and why I'd like the pads as close to the hole as possible.

I don't know how  this manufactured and thus if there would be any problems if I just placed the pads without any spacing, would they just get drilled through. Or is it drilled through and then the pad is made? 

#Others#
PCB