JLCPCB Altium Design Rules

I know this has been covered 100's of times, but I can't seem to get a clear answer. JLC claims they do not do VIAS, only plated thru holes but they list different minimums for both. Here is what I find for a 6 layer board:



https://jlcpcb.com/capabilities/pcb-capabilities



Then there is another page with totally different info:
https://m.jlcpcb.com/capabilitiesDetail?index=2



image.png
image.png







Hole size 0.20mm recommended 0.15mm minimum - This makes sense.
Via diameter 0.1mm minimum 0.15mm recommended larger than hole size.  - OK so this gives us 0.35mm but that is an annular ring of 0.075mm which violates the minimums.
Then they show PTH 0.20mm hole with a 0.15mm annular ring. Now nothing makes sense.

What is PTH 0.30mm?
How can you have a 0.20mm hole with a 0.35mm diameter and still meet the minimum annular ring requirement.

They say they cannot manufacture blind or burried vias only PTH. What is the point of any of the VIA information?

Please help, I am losing my mind.

#PCB#
PCB
All the problems with EasyEDA and why I'll switch to Flux.AI/etc

I have been struggling with EasyEDA since December 2022. Even with the pain of having to relearn a new piece of software, I cannot see myself using due to the constant hiccups and workarounds that massively reduce productivity.
Aside from the high-level issues and bugs in EE, below is my personal list of problems that make the user experience absolutely tragic. They mostly pertain to the PCB editor, but many apply globally.


1 - First and foremost; the complete lack of official support and updates. I've been very fortunate that Andy Fierman (not an EasyEDA employee!) has helped me figure out some of the problems I've faced, but this is not fair on him and is not an acceptable solution. If EasyEDA is EOL/dead and will not receive further updates, please just tell us.

2 - No real-time support community space. Discord would be a perfect place for this.

3 - Bug: cannot update PCB design if PCB is more than 2 layers. The only workaround is to completely delete everything in your inner layers. Not an acceptable solution.

4 - No shortcut to toggle snap. I have created my own mouse macro with AHK, but, by definition, using it requires that any selection is removed. (You can't access the snap options with items selected.)

5 - No ability to group selected items in PCB editor.

6 - No ability to save and load a selection if items. Being able to save multiple groups into

7 - Nets frequently become broken (unassigned) for non-obvious reasons. Further, there is no native tool to repair disassociated nets.

8 - Flip Horizontal/Vertical are very frequently not available for selections of certain items.

9 - Updating a component's footprint in the Schematic window either a) breaks things in the PCB window or b) doesn't work at all.

10 - No shortcuts for third-party scripts.

11 - Lack of tools to flip a component layout from one side of the board to another (including correct mirroring of components, etc)

12 - Bug: Areas of exposed copper are not moved along with the shapes that were used to create them.

13 - No native tool to join tracks. (Third-party script exists, but only 2 tracks can be selected at once)

14 - Sometimes undo just doesn't work or running undo/redo will leave behind items.

15 - Undo for shortcuts B & T (when executed on multiple items) undoes each item separately (does not undo the entire group at once).

#Bug Reports#
Bug Reports