Using EASYEDA pro for the first time so it could be user error.
When making a PCB, the components autosnap to grid but the grid is stuck at 2.54mm pitch. How can I change it? I tried changing "theme" as shown in this page: EasyEDA Pro Tutorial but no effect. Thanks



Hi,
in "Export Schematic BOM" | "Assign LCSC Part#"\, when I enter resistor with part number C916018 (https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_Firstohm-First-Resistor-Condenser-MM52F270KTKRTR2K0_C916018.html)
I get "Not Found !" but when I select "search on lcsc.com" the part is found and the above url opens.
Conversely when I pick a part (C365129) from within the dialog and click on the part number link (to the left of "Stock") the part is not found on https://lcsc.com !
BTW, the same happens if I try using the manufacturer's number, so the part can not be found/used in easyeda.
Obviously EDA lookups are not performed against the lcsc.com database.
Why is a different db used?
As it is, the system is unusable!
The table of Extensions in the topic:
https://easyeda.com/forum/topic/Extension-User-Extensions-for-EasyEDA-Summary-9e065b68316f4491a3911dc6204be31e
has been replaced with an image.
This means that the links to the sources of the Extensions no longer work.
Please add a note to clarify that the reader must click on the link:
【插件】立创EDA插件汇总(EasyEDA Extensions Summary) - 飞书云文档 (feishu.cn)
to open the complete list and access the links to the extensions.
Please see:
https://oshwlab.com/andyfierman/bugs-in-instruments-and-meters
Waveform names in Function Generator are confusing.
TRIANGULAR WAVE in right hand panel should be renamed SAWTOOTH to match name displayed in XFG1 in schematic.
OR
XFG1 SAWTOOTH name displayed in schematic should be renamed TRIANGLE to match name displayed in right hand panel.
XFG1 SQUARE name displayed in schematic should be renamed RECTANGLE to match name displayed in right hand panel.
Oscilloscope default timebase and vertical scales are wrong.
After 1st simulation, the vertical and horizontal grids do not match the 1ms/div and 1V/div values.
Correct vertical scaling is only shown after first user edit of values.
Timebase is changed to correct time/div but no longer fills screen if it is changed from the 1ms default value.
If the View Meter button is clicked before running the simulation for the 1st time then Timebase is corrupted.
Oscilloscope grid X axis does not scale to fill oscilloscope display area (screen).
Adding a Voltmeter generated WaveForm plot with no warning.Without Voltmeter XMM1 in the schematic, the sim just gives an Oscilloscope readout that can only be viewed after clicking View Meter and the Ammeter readout is visible directly in the meter display in the schematic.
Adding a Voltmeter unexpectedly generates a WaveForm plot of the oscilloscope traces!
If the user wants a WaveForm plot then they should place a Voltage Probe from the Wiring Tools palette.
#Bug Reports#







