gsm.ads 1 second ago
I would like to draw shielding over some parts of the circuit. Or drawing https://easyeda.com/forum/topic/Coloured_Fill_Overlays-eOIZhztL3
For this, it would be nice to add an escaping function or the ability to fill blocks with hatching with translucent tones, for example, like here:

The next feature is to work with the schematic page:
It would be convenient to set and change the order of the schematic sheets
And also, a very powerful tool is an indication on which page and in which part of this page all ports or net labels are located, for example, as here:


it's a very powerful feature!
Reply
Chrome 91.0.4472.106 Windows 10 EasyEDA 6.4.20.6
I am very beginning to use the very rich EasyEDA.
I started using it for a public, simple electronic circuit.
First I drew the electronic circuit: everything is fine.
I had the PCB generated, then I started placing the components by hand; in the PCB I cannot distinguish left-right and top-bottom of each component. So I thought about using the "Component autoplacement into PCB"
I need to place only two components (JP1 and JP2); all the others can be positioned by EasyEDA in an optimal way to optimize the PCB. On the website "https://easyeda.com/forum/topic/Component-autoplacement-into-PCB-3f0f310db0d74a9bbf848953c4c8048d" I read about the "Component autoplacement into PCB".
I used "CTRL + SHIFT + X", but ... nothing happens!
Obviously I did something wrong, but I don't know what.
I can't go on: I need help!
Thank you,
Dario

Hi,
I recently had the following issue and had a strange behavior from Easy EDA.
I choose to make the links between upper and lower layers not through vias but through the pads of existing components (maybe a wrong strategy but not the point here)
As expected these multi-layered components are not present on the top/bottom paste mask layers for obvious reason (much have been posted also on the matter).
So I started to do it by hand by adding solid surface element above these pads.
However I noticed that some multilayered elements are still present on the paste mask layers; Notably this is the case for the holes of the USB connecter (which is logic) but this is also the case for two pads of 1205 resistors namely R10 and R11 ( but not for all resistors of the same size/footprint used). I was not able to understand what attribute is different for these components that they still appear on the paste mask layer.
the link to the design is here
https://oshwlab.com/b_grigoriu/mod-t962-upgrade-board
(As I am still learning I am also ready to accept any criticism on the design if constructive. )
Thanks in advance
P.S. I also found a way to not doing manually the adding of solid areas by :
- creating the design
- saving the gerber file
- order the PCB from this gerber
- reopen the design
- transform all multilayered pads in monolayer
- saving again the gerber
- using this second gerber to order ONLY the Stencil
It is fast and solves the problem but still dont help me to understand the issue above


почему возникает ошибка. Там ничего нет. Как это решить?
, :