Most designs need an electrolytic capacitor across the input power. For 3.3V and 5V designs the basic part tantalum C16133 is suitable, but for 12V or 15V supplies there is no basic part available so it costs $3 to put a capacitor on the PCB. Could you select one SMD electrolytic of your own choosing, maybe 100uF or 220uF, 25V or similar, to put in the basic parts list so that everyone uses that one and volumes would be high enough to justify it being a basic part ?
#PCB#Ahoi,
as the issue description says something went wrong on the library.
Unfortunately, refreshing does not help.
As the screenshot below shows,
The second one is renamed to this.
and the third item is not existing.
So please take a look in my lib, you will not find the third one.

Hello,
I am trying to create a thermal pad on the other side of the board below this footprint: QFN-28_L5.0-W5.0-P0.50-BL-EP
The JLCPCB component with this footprint is a stepper motor controller: https://lcsc.com/products/Motor-Drivers_611.html?q=tmc2209
I tried to generate an exposed copper area on the bottom layer underneath the footprint. Then I tried to use 'Add/Rmove Vias' to create an array of vias between the exposed die pad and the copper area on the bottom layer.
Unfortunately, this does not seem to work. I can only generate vias when I make two copper areas, one on the top layer and one on the bottom layer. Then the vias appear properly.
But between a 'pad' of a foot print and a copper area the 'Add/Rmove Vias' tool does not seem to work. What am I missing? Is there a work around? I thought of using a QFN footprint without the exposed die pad, and then creating a separate grounded copper area instead of the pad. But that seems a bit 'inelegant'..;-)
Any input would be greatly appreciated! Thanks much in advance!
Thanks!
#PCB#


dont highlite??

