In:
https://easyeda.com/account/user/projects/all
with the Chrome and Firefox browser window zoom set to 0, the buttons are truncated at the right hand side:

The browser zoom has to be reduced to 80% before the buttons fit the frame:

In:
https://easyeda.com/account/user/messages/
with the Chrome and Firefox browser window zoom set to 0, the text in Messages may be truncated at the left (see the little hand) or the right hand side:

Reducing the browser zoom to 90% makes the text fit the frame:

Hello guys, I am designing a PCB for an H bridge inverter with an interrupter to adjust duty cycle. The circuit requires a lot of MKP capacitors, but it's very hard to determine if the size/package of these capacitors will match the packaging on the PCB designer, because they come in various sizes. Is there a way to create a PCB package that has multiple pads of different distances to allow different capacitor size options?
Project: https://easyeda.com/ss4c0001/h-bridge-inverter

I'm kinda doubting my self on weather this schematic needs a moment contact switch or not in order to work the way I want it to.
I need a timed switch that will run a small fan for an X amount of minutes after pressing a button, kinda like with lights in blocks of flats.
Press the button and the light goes on for say 5 minutes.
Am I correct that I need to place the moment switch on either pin 2 or on pin 8 from the NE555P.
Pin 2 = trigger
Pin 8 is VCC
Project is here https://easyeda.com/GerritMax/delay-on-timer-230v
Dont really want to mess this up as it'll be switching 230 volt.
#Schematic#

