Hi
I'm new to EasyEDA, I was using OrCAD.
I made a new project and the library didn't have the schematic for a IC I wanted to use so I made one.
Now I wanted to connect U1 Pin 9 and U2 pin 14 but I can't get my cursor to recognize pin 9. Also does the same thing for some of the pins.
Does anyone have a solution to this?
https://easyeda.com/editor#id=|0a3488d696f74a2595a9e341edd2f30a
Hello, I was wondering what the best way to create an open copper area for a spring pin connector would be.
Here are the spring pin connectors that I'm looking to use: https://www.digikey.com/product-detail/en/mill-max-manufacturing-corp/0965-0-15-20-80-14-11-0/ED1649-ND/2784013
I'm trying to replicate these lightsaber connectors seen here: https://www.thecustomsabershop.com/V2-NeoPixel-PCB-connector-and-pin-set-11-Pins-P1397.aspx
Essentially, there is a bare metal ring that the spring pin is pressed against to make a connection. Then, the side with the spring pin is locked in place. What I need to do is create that open copper bare spot so that the spring pin connector can make contact. I'm not really sure what the best way to do that is.
#Skill#Hi all!
Can't run simulation when schematic has variable potentiometer. Get an error
Error on line 5 : r17 u3_2 u3_2 r17_3
unknown parameter (r17_3)
Error on line 7 : r14 d2_2 r17_3 d1_1
unknown parameter (d1_1)
Although, tried set K, K(%), Value, spice params, etc... Every time the same error. How I can simulate that variable resistors? They are R14 and R17 on schematic.
Editor: https://easyeda.com/editor#id=|5b2de0ef0fa94855a72839273e1befef
Thanks,
#Simulation#I found this https://github.com/adafruit/Adafruit-Feather-M0-RFM-LoRa-PCB and want to include it into my library to make a custom PCB where the Feahter sits on top of the PCB. How can I include the FEAHTER M0 RFM69 into my library? Or is this the Toal wrong way?
#PCB#







