Hello,
Upon opening my PCB editor, the origin is at -490,-390, (aprox).
And my PCB is a dot way off the page, that I must zoom into to see/ work on.
I am unable to find any via's, parts, or anything else, not right around the PCB.
Because of this I am unable to print a 1:1 layout to check part sizing, etc. All I
get is a page full of canvas. I am using the 'Export PDF' function to do this.
I would be grateful for a second eye on this problem.
-Lisa Dalton
https://easyeda.com/editor#id=efd87536b73a4959a680d78a01346dd6|c9279a7958064c3c83d23789c52cbc2c
Hi all,
What I have is pretty simple starter project to start me on my journey of making PCB's, it's an AND gate made up of a couple of switches and 2 transistors, some resistors and and LED. I have a CR2032 battery holder to provide power.
When i first started I had the battery holder on top which is SMD and it just has pads to solder to, the rest of the components are through hole, but at some point I realized the pads for the through hole components should probably be on the bottom. So rather than routing stuff on top I moved the battery holder to the bottom and figured I would just do all the routing on the bottom, with the silk screen layer on top. For some reason when i do this the auto-router just gets confused and never routes the project, so I am thinking I have something wrong.
The pads for the through hole components seem to be set for multilayer and I set all the rats nests to be on the bottom layer so i thought stuff would just automagically work. =)
I made the project public if someone has time to look (if needed)
https://easyeda.com/megahertz/Gate-Demo-1.0
Appreciate any help. =)
Gerald
#PCB#

