Show connecting nodes at every vertice.
Refer to the following screenshot: https://imgur.com/hjDpHtu.
The top of C21 does nto have a red circle showing that it is connected. While this is okay, the red circle provides feedback that it is positively connected. Sometimes after editing a schematic for so long somethings get shifted by a pixel or two and LOOK like they are connected, but are actually not. Providing the red circle at every single connected vertice would provide the user with positive feedback that the points are connected.
As another example refer to this screenshot: https://imgur.com/sJPYNZt. It would be nice to have the red circle at all of the highlighted areas. The bottom of R12 is NOT actually connected (its off by a pixel or two from being moved around so many times), and almost screwed up my PCB layout.
#Feature Requests#I am an industrial control engineer who uses graphic editing software to create user interfaces for industrial control systems. A feature that is often included in professional software packages that it most useful would be a floating "sub-window" (like the PCB tools, or Layers tiny floating popups) that shows each footprint in a list tree view. When the item is clicked on, it would refocus the screen on that object. This tree view would also properly show the groups that have been created with the ability to drill into the group and select an object in a group. I've provided a screenshot of a program called FactoryTalkView SE from Rockwell Automation that shows this feature: https://imgur.com/a/NxDsh. This feature would allow grouping to become very useful.
The way they handle selecting is pretty good as well. If you want to select something in a group, LEFT CLICK once to select the group. then DOUBLE LEFT CLICK to "enter" the group, then LEFT CLICK to select the component in the group (or a sub-group). This way groups can be embedded within groups. In order to "drill down" without using the tree list, you would CLICK..DOUBLE CLICK...CLICK...DOUBLE CLICK...etc. CLICK to select, DOUBLE CLICK to drill in one level.
Hi,
First the link:The pcb I have questions about
In high frequency circuits (ddr memory...), it is even more important to think about the current return path.
In the above link, I decided to create two power planes and two ground planes.
Even if one large ground plane would be better, since there is no relation between IC1 and IC2, I think there is no way the current makes big loop and wreck my circuit performance. So a bigger ground plane would only help EMI and heat (which are very important).
Am I right?
Are my via to PWR and GND correctly put?
Thanks a lot,
#PCB#Hello, I have made a PCB with relays and other IC. When I see the analysis results on Gerber file viewer one msg was '' Can not identify the minimum trace spacing''.
I have checked my DRC errors no track is mixing with other. The track width is 4 mm and 1 mm because of high current. Please see the link PCB to see what is the problem in my PCB.
Thanks
Abdul
