Finding an IC that EasyEDA can supply for my application

Hi,

I am struggling to find a suitable IC which I can replace my 16x MOSFET & 2 shift register combo with to reduce weight, size and cost. I am looking for a part which can be supplied by EasyEDA. Currently I am building with the TLC6C598 http://www.ti.com/lit/ds/symlink/tlc6c598-q1.pdf but it is not listed on the EasyEDA parts list or on the LCSC site.

Would you be able to suggest a viable alternative? The application is running 16 channels to LED strips (some RGB, some White) which require 12V to power them. The IC needs to be run off 3.3/5v logic to interface with the ESP8266 microcontroller.

Many thanks for your time, I would really like to be able to get another prototype built but I will need to find a suitable replacement for the TLC6C598 before I can.

James

#Skill#
Circuit Design
Components lost from PCB layout

BUG Components lost from PCB layout

Concise problem statement:

All of the components from a PCB layout file are lost when opening the file. Tracks, board outline, added text etc remain. The "Components" list in the Design menu is empty.

Steps to reproduce bug:

Unsure. It has happened twice today, on the same design. The first time the three components on the bottom side were missing - I guessed I might have removed them by accident, so I re-added them using the "update PCB" command in the schematic viewer, and re-postioned them. Then to double-check I re-ran the "update PCB" command again. This time all of the components were added (top and bottom), outside the PCB footprint. I had to manually re-position all of the components, recreate the gerber files etc.

Fortunately I saved the schematic and artwork files locally, as .json files, using the "Easyeda source" command.

Then I closed and re-opened the browser and this time ALL of the components were missing, on one of my two projects.

I created a new project and imported the saved .json files using the Open EasyEDA file command. The components were present and the "update PCB" command showed the artwork was in sync with the schematics.

I think (though I am not certain) that the three components on the bottom of this new project then vanished again. However they are there now.

If I was asked to explain this I would speculate that the save of the file to the server did not complete, so when I re-loaded the file I got a truncated file with the components missing. Or similar. Can this happen? Is there integrity checking of files as they move in both directions?

Results:

Expected results:

Browser: Firefox.

#Bug Reports#
Bug Reports
How to create assembly drawings?

I can see the discussion here:
https://easyeda.com/forum/topic/Exporting_with_assembly_drawing_causes_missing_traces_on_layers-PGqWsmga4

But I can't see how to repeat this: i.e. to see the silk screen plus pads only. Could you provide a step-by-step description? Is there already a tutorial on assembly drawings?

Even if I can replicate this example it is probably not what I want. I need an assembly drawing separate from the silk screen. I can see how to turn on the "TopAssembly" layer and I can draw on that manually (adding "Tracks" to create component outline and "text" to add the component idents). What would be perfect would be to copy the silk screen layer onto the TopAssembly layer then edit the TopAssembly layer. Is there a way to do that? If I try copy and paste I get the whole component copied...

Thanks - Charles

#PCB#
Circuit Design