I'm new to EasyEDA but not EDA in general. I'm trying to figure out how net labels work. When I place a net label, it appear to simply be an annotation, that is to say, it doesn't seem to really be "attached" to the wire in any significant way. I tried an experiment where I placed VCC, wired it to a gate, then added two more wires to other gates and joined them all together. After that, I added a different net label to each of the other wires. I then converted the schematic to a PCB and got no errors or warnings. See this project.
Any help or feedback would be greatly appreciated!
Hi, I just want to be sure.
The minimum silkscreen line width is 6mil, the minimum silkscreen text height is 32mil.
I created the following test project. I added a font named Calibri. As you can see, the line width and height are according to the minimum PCB specs. However, the actual sizes - when using the measure tool - are smaller, i.e. Calibri 32mil height is actually 20mil. Am I correct that this text cannot be printed?
Thanks
#PCB#