Key & Mouse

https://easyeda.com/Subi/_-rEs2eOnXx
希望大家多多支持、指教。

#Skill#
Circuit Design
HOW TO TROUBLESHOOT

I just finished designing the schematics together with the final PCB. before i made my order i wanted to be 100% certain that my circuit will be functional.
here is the link
https://easyeda.com/blutbad3/conifa-kz9vfY6sO

It's an Energy management system that uses the 8051 microchip with the GSM SIM800l module to send wireless connections over radio frequencies of any GPRS service provider through texts. the Sim800l requires a max of 3.5v so i'm using 2 dc-dc converters, one for the SIM800L module and the other for the 4 relays that need 12V optimum. and i also included a UN2003a relay driver and an LCD display "16x2".
There are several LST connectors as i had planned earlier to just plug in the several harware. that is the LCD,SIM800L module and the 2 DC-DC convertors.

thank you. your help will be very much appreciated!

#PCB#
Circuit Design
Better track routing

Feature Request

Brief title for your desired feature:

Better track routing

How would you like the feature to work?

There are many problem with routing track right now, which make routing track a pain and my though on how to fix it.

1.) You Can not tell which air-wire goes to what component?
I would high-light(turn it white) the air-wire when selecting the components the air wire belong to.
I would also make air-wire show up in the design manager.

2.) You Can not tell if the air-wire is for a component on top or bottom of the board.
Make different color air-wire for components. (if you have a air-wire for two resistor that need to be connect on top of the board (use red color air-wire) and (if you have a air-wire for two resistor that need to be connect on Bottom of the board (use blue color air-wire). If you have a resistor on top and bottom use a dash red or blue. maybe both colors

3.) It to easy to move track instead of point. I keep trying to move a small portion of track around and the whole things keep moving or accidentally select a different object.
I would do a few things.

a.) I would put a lock button on the tool-bar which would prevent it from select a different component when editing and make a hot key for it.

b.)I would make select segment easier by high-lighting and allow you to click the segment instead of the point(only work in lock mode) also allow you to move segment on the track with arrow keys.

c.) I would a a junction bottom that would connect 2 track to gather at there nearest point.

Why is this feature important to you?

I spend lot of time trying to figure out where the air-wire are going I have air-wire yet show And i don't know why.

#Feature Requests#
Feature Requests