Although I know EadyEDA can add vias to copper area I need something different e.g. place vias ground fence in some distance around crystal oscillator in one row. How to achieve this?
Should I use Narrowband RF System Oscillator Layout for my LoRaWAN SAMR34 transceiver?
#PCB#
I am working with SAMR34 LoRaWAN transceiver which has a small BGA64 package with pitch size 0.65 mm. The space between pins is just 0.2 mm.
I don't care now that JLCPCB requires for 4-Layer PCB minimum trace width 0.1 mm and trace to BGA pad spacing also 0.1 mm which I can't fulfill. For space between pins 0.2 mm is not possible to fit a trace 0.1 mm and spacing 2x 0.1 mm, I have to use spacing 0.05 mm.
The problem is I am unable to draw traces in EasyEDA in the center between BGA pins and getting DRC Errors. The EasyEDA snap them to the specified spacing although I know I can disable Snap by setting it off.
Is there any way for EasyEDA to center the tracks between individual pins for me or autoroute only selected BGA pins?




I'm new to PCB desing. Just started today. Can't figuring out whay this is happening!!!! 







