Components for Easyeda

Hello friends,
I'm looking for an article to immortalize in Easyeda. Can someone help me? Here is the Link 
Cat to the article you are looking for. Alternatively, this article would also be ok. Link
Thanks very much

#General Discuss#
Technical Discussion
Requesting a second set of eyes for my first Circuit to PCB *Component Datasheets at Bottom of Post*

LINK TO MY PROJECT



Hello everyone,

To the point, this is the first PCB I will be sending to print, and I have already purchased all the components (want to solder it myself).

Would anybody familiar with High Power LED DC-DC Driver circuits be willing to take a quick look to see if everything looks ok (from high-level)?

Thanks!

A few quick notes:

  • Connections check-out
  • Design rules check out
  • Copper GROUND pour top and bottom
  • Additional GROUND layer via's per ST datasheet
  • No 90 degree tracks/traces
  • Larger IN/OUT traces for the 2.5A
  • IC footprint pad contains thermal vias
  • Capacitors close to IC inputs for stability
  • Vcc ran to VinA per datasheet through via's (routed through bottom layer)

LINK TO MY PROJECT



I know this will be a simple ciruit to most on here, but I put a lot of time into research/trial/error to get to this final (hopefully) product.
Buck
https://www.st.com/content/ccc/resource/technical/document/datasheet/32/ba/a3/74/93/3f/4d/24/DM00064431.pdf/files/DM00064431.pdf/jcr:content/translations/en.DM00064431.pdf
10uF Cap
https://search.murata.co.jp/Ceramy/image/img/A01X/G101/ENG/GRM319R61E106KA12-01.pdf
Inductor
https://www.we-online.com/katalog/datasheet/744314330.pdf
R 20kohm
https://www.yageo.com/upload/media/product/productsearch/datasheet/rchip/PYu-RC_Group_51_RoHS_L_12.pdf
R 250kohm
https://www.yageo.com/upload/media/product/productsearch/datasheet/rchip/PYu-RC_Group_51_RoHS_L_12.pdf
1uF Cap
https://www.yageo.com/upload/media/product/productsearch/datasheet/mlcc/UPY-GPHC_X7R_6.3V-to-250V_22.pdf
22uF Cap
https://search.murata.co.jp/Ceramy/image/img/A01X/G101/ENG/GRM32ER61C226KE20-01.pdf
Cree LED
https://assets.cree-led.com/a/ds/x/XLamp-XPL.pdf






#PCB#
Circuit Design
So long, farewell

In 2014, when EasyEDA was featured on EEVBlog 606, I became an early adopter. I was grateful for the ease with which you could create schematics and transform those into PCBs.

There were a few quirks, but it was leagues ahead of Eagle. Things improved, features were added.

Unfortunately, "checkbox" features were chosen instead of addressing the hordes of niggling issues. Building out a board is so annoying even today, with frankly bad UI choices like floating windows, canvas properties spread around, not always there when you need them (snap on/off, snap distance, grid size, the list goes on). Laying tracks and aligning parts is just painful, and I find myself fighting the software, rather than use it. There are so many workarounds needed that it has become almost as frustrating as Eagle was back in the day.

Here's a quote from Dillon on the EEVBlog forum:

We are sure we have checked KiCad, it is good enough. But it is hard to use.

Well, I've just downloaded KiCad 7. I'm sorry to say that it is MUCH easier to use than EasyEDA. I recreated one of my boards in half a day, and it is BETTER than what I could do with EasyEDA without running out of patience. It might look a bit intimidating at first glance, but the software works FOR you. Creating professional looking schematics and boards is so much more pleasant and efficient.

Of course, no one should care about a single user's opinion, and really, no one has forced me to use this FREE piece of software, but I am still hopeful that EasyEDA team members will one day pay attention to UX details. Until then, I wish you the best.




#PCB#
Circuit Design