logo
  • JLCPCB - PCB/PCBA
  • JLC3DP - 3D Printing
  • JLCCNC - CNC Machining
  • JLCMC - Mechatronic Parts
more
All posts
Electronic Community
Electronic Tips & Projects
Design & Manufacturing
Embedded Systems2
Microcontrollers
FPGA & Programmable Logic
Analog & Signal
Power & Engery
RF & Wireless
Sensors & Actuators
Wireless & IOT
Automation & Control
Test & Measurement
Equipment & Tools & Resources
Makers & Education Spaces
JLCDMP
JLCDMP 3D Viewer
Mechanical Community
Mechanical Tips & Projects
Mechanical Design
CAD & 3D Modeling
CNC Machining & Milling
Mechanical Components & Sourcing
Manufacturing & Machines
Mechatronic Systems
Industry Applications
Workshop Tools & Metrology
tesst007
OSHWLab
Activities
Projects
Others
JLCPCB
PCB
FPC
PCBA
SMT Stencil
Layout
Flexible Heater
SMT Components
JLC3DP
SLA (Resin)
MJF (Nylon)
SLM (Metal)
FDM (Plastic)
SLS (Nylon)
WJP (Resin)
BJ (Metal)
JLCCNC
CNC Machining
Sheet Metal Fabrication
JLCMC
Mechatronic Components
Custom Parts
JLCONE
Desktop App
Mobile App
EasyEDA
Circuit Design
Feature Requests
Bug Reports
API & Extension
Others
JLCCAN
JLCCAN Help & Tips
SOLIDWORKS Automation
Projects & Showcase
LCSC Cable
Technical Discussion
Showcase
Help & Support
LCSC Panel
Technical Discussion
Showcase
Help & Support
asdasdasd
Terms Privacy Cookies
© 2026 JLCHUB.COM All Rights Reserved.

Follow
0
Posts
0
Comments
0
Followers
Artem Rodichkin
2022-04-09 19:34:36 Edited 5514 Views
any MOSFET with 4 pins?

We are designing new logic that promises to be radically faster than CMOS and to prove that concept we are making 4 bit adder (already made, and it works!)
Until now we used optrons, as we found no better option(
It's not an option any more, we desparately need NMOS and PMOS (ideally matched) with 4 pins (not with 3) - source, drain, gate and base. Base must not be connected to source.
Do such exist in JLCPCB parts library or LCSC?

In best case scenario we need device as on image, called Logistor, but I'm pretty sure, such do not exist. logistor.png

#General Discuss#
Technical Discussion

Follow
0
Posts
0
Comments
0
Followers
User Avatar
cxt13
2022-04-09 06:42:14 Edited 868 Views
Duplicate prefix component

I getting the same error again and again. I've deleted the previous component and changed it with a new one still I'm getting the error.

image.png

#PCB#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
User Avatar
paterlini48
2022-04-08 10:44:15 Edited 578 Views
Assigning a part vendor

Hello, it is possible to see JLCPCB while choosing the component assignement? I only see LCSC.

#General Discuss#
Others

Follow
0
Posts
0
Comments
0
Followers
User Avatar
paterlini48
2022-04-08 10:36:56 Edited 1110 Views
HOW TO SEE THE ERRORS

Picture.png
DRC ERRORS ARE EASY TO CORRECT. BUT THE TIPE OF ERRORS SHOWED IN THE IMAGE SEEMS IMPOSSIBLE TO DISCOVER WHERE THE ERROR IS.....

#PCB#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
User Avatar
Gauthier Östervall
2022-04-07 12:43:44 Edited 4070 Views
Export 3D obj file has wrong scale

Exporting my PCBA to obj 3D file shows up with the wrong scale, both in 3D CAD program and in Slicer.
It is way too large (PCB thickness 10 mm instead of 1.6 mm). I don't see that this factor relates to imperial/metric conversion.

Here is a demonstration of this problem: https://youtu.be/VlThPNQyKbQ



Can it be fixed?

#General Discuss#
Others

Follow
0
Posts
0
Comments
0
Followers
User Avatar
Gauthier Östervall
2022-04-07 12:28:09 Edited 758 Views
Import 3D model only shows the PCB part

I can see the 3D model in my workspace's library.
When I try to make it show in the 3D model manager, I only get the PCB part of the model. The model was imported with a zip file, which contains an mtl file, and an obj file.

Here is a screen recording of my issue:
https://youtu.be/bgNRhFPcT2Y



How do I import a 3D model of my component?

#PCB#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
User Avatar
Gauthier Östervall
2022-04-07 12:11:29 Edited 2300 Views
Cannot import 3D obj file

I created an obj file for a component, but cannot import it.
The error I get is "Please select a file", although there is a file selected.
The model list is empty.

Here is a recording of first showing the obj file in a 3D slicer, then failing to import.
https://youtu.be/JD194uwIh7E



The text before selecting a file implies that obj files are supported, what is happening?

#PCB#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
tiger54
2022-04-07 07:46:20 Edited 1976 Views
Z-axis milling

Hi,
I would like to put an OLED display (thickness 0.9mm) inside a PCB (board thickness 1.6mm) so that the entire thickness is less than 2mm and I am able to draw some tracks on the bottom of the display.

I read that this procedure is called Z-axis milling. 



Is it possible to create this kind of board with JLCPCB? Can I design it with EasyEda? Maybe with 4 layers and cutting just 3 layers?



Thanks,
Adriano

#Feature Requests#
Feature Requests

Follow
0
Posts
0
Comments
0
Followers
User Avatar
Bob11746
2022-04-07 02:12:04 Edited 1311 Views
Some misc questions

Hi Andy,
1) In both the schematic and the PCB editor, when I move symbols or parts, the wires/trace disconnect and rarely follow the parts.  Am I doing something wrong?  Is there a setting that I am missing?

2) When looking at net errors, the +3.3V keeps popping up.  Unfortunately, when I click it, it only goes to any +3.3V net, it does not go to the pad/wire location where the problem is.  With a large board, and +3.3V all over the place it can be tedious to find the problem.  Is there anyway I can fix this?

3) I have created two parts, it's simply a PCB solder short and open.  It is better than 0.1" header and jumpers in my application.   They are two hemispheres, and the "shorted" one has an additional copper shorting the two hemispheres.  This way I can place either a short or a open solder pad.  I solder the open to short, or cut the "copper" area to open a particular jumper.  Now, in the DRCs, the open obviously works fine, but the shorted one throws DRCs.  Is there any way I can disable DRC checking for the shorted version, or fix it in the part symbol or footprint?  Currently, all my DRCs are of this shorted jumper.

Regards,
Bob

#General Discuss#
Others

Follow
0
Posts
0
Comments
0
Followers
alfonso.ramirez
2022-04-06 15:53:16 Edited 2218 Views
2n2907 transistor wrong simulation results

I am trying to simulate basic circuits using PNP and NPN transistors. The 2N2222 NPN transistor form EasyEDA library works fine but the 2n2907 PNP does not work well. It sawps Vbc and Vbe voltages, and provides very low BetaDC:  -3.99e+00. I cannot find more BJT transistors from EasyEDA spice library. Can anyone help with transistors PNP and NPN thta work well in simulation ?

#Simulation#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
User Avatar
repit
2022-04-05 23:10:16 Edited 676 Views
Components In 3D

Hello all
Pls can anyone explain why I don't see all components in 3D view

#PCB#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
User Avatar
netdudeuk
2022-04-05 12:43:47 Edited 1643 Views
Lolin D1 Mini V4.0.0 support

Hi

Please does anyone know if there's been any community support added for the Lolin D1 Mini V4.0.0 (like this) ?

I've searched for a while but cannot find it.

Thanks

#General Discuss#
Others

Follow
0
Posts
0
Comments
0
Followers
w4mmp
2022-04-04 19:26:43 Edited 899 Views
Cloning not working

Hello,
It appears the cloning of a project is now working.  I have made several attempts to clone a project.  The dialogs all appear to work but the clone never appears.
Regards,
Ron

#Bug Reports#
Bug Reports

Follow
0
Posts
0
Comments
0
Followers
User Avatar
BengaliLegend
2022-04-04 17:03:21 Edited 1079 Views
Determining PCB Size In CM Or MM

Hi, I Designed A PCB And Want To Make It Through A Local Company.

Everything's OK But They Are Asking For The PCB Length And Width, I Don't Know How To Determine It So Can Someone Kindly Help Me?

#General Discuss#
Others

Follow
0
Posts
0
Comments
0
Followers
Peter Sellers
2022-04-04 16:03:28 Edited 1127 Views
Footprint Naming Rule

Hi,

could anybody help with the right footprint naming of this terminal (Wago 256-50x):
In my case x=8 (numbers of terminals)
Screenshot from 2022-04-04 17-55-12.png
CONN-TH_xP-P7.62_256-50x or
CONN-TH_xP-P7.50_256-50x or
CONN-TH_xP-P5.0_256-50x or
something completely different.

One importent thing every terminal have 2 pins, connected together.

How should the symbol on the schematic look?

Suggestions are welcome.
Thank you for your effort.

BR
Peter

#Skill#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
lyseoy
2022-04-04 06:07:11 Edited 2522 Views
Thermal vias are not plated

Hi all

I received my first order from JLCPCB the other day, and on inspecting the boards, it appears that around 90% of the thermal vias are not plated. They are designed to have diameter 0.61mm and drill diameter

The photo below shows the problem. (It's a bit fuzzy, but it was the best macro photo I could make with my phone)

1. Is the plating indeed missing from all these vias\,  or is some optical illusion at play?
2. Should I have used larger diameter vias for better results? What should be the minimum diameter?

276301441_646418529786291_799727019605300234_n.jpg

#PCB#
PCB

Follow
0
Posts
0
Comments
0
Followers
User Avatar
jaka87
2022-04-03 21:49:04 Edited 693 Views
update PCB weird behavior

I opened my project  and  clicked "update PCB" and to my surprise some of the components that i havent changed are shown on update list. If i accept this change some of the of the components change footprint to some weird version.

I dont know how to explain it better so i will just show what i mean.

Here is how the component looks in scheme
scheme.jpg

end here is my PCB
before.jpg
then after i import changes (there should be none since i haven't
change anything in scheme)
change.jpg
and if i accept this i get this component with wrong orientation
after.jpg

Any idea why this happens ?




#Bug Reports#
Bug Reports

Follow
0
Posts
0
Comments
0
Followers
User Avatar
bijanmohandes
2022-04-03 10:25:28 Edited 694 Views
STEP Model

HI
Does anyone know when EasyEDA will be introducing support for importing 3D STEP models for components?
STEP seems to be the most universal model used by everyone....
Thanks

#PCB#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
ypasindu
2022-04-02 19:20:14 Edited 3741 Views
How to make cut through slots in PCB to make distance gap for high voltage application

Dear team,

I was wondering if anyone knows how to draw the high voltage isolation slots in EASY EDA. I tried to select the board outline layer and draw in the mid of the PCB but no matter how much I try to increase the width of the line it wasn't shown in the 3D view or Garber view. Please help me.! :)

#PCB#
Circuit Design

Follow
0
Posts
0
Comments
0
Followers
User Avatar
QDM360
2022-04-02 16:14:32 Edited 720 Views
Text with multiple lines not properly imported from KiCad

Hi,

I created a PCB with KiCad (5.1.8) which contains text with multiple lines, e.g.:

Line1
Line2
Line3

When the KiCad ZIP is imported in EasyEDA, the text instead reads:

Line1\nLine2\nLine3

So, all text is drawn in a single line on the PCB - and instead of the line-feed "\n" characters are inserted in between the text which should be in separate lines.

Seems there is some kind of import issue, so text with multiple lines is not properly converted.

#Bug Reports#
Bug Reports