n buen dia para todos , necesito de la ayuda de todos ustedes , necesito sacar la matricula de 2 integrados pero solo tengo el diagrama pdf pero no cuenta con las matriculas para poder reemplazarlo , habra alguien que pueda echarme la mano se lo agradeceria esperando de su ayuda mi correo bocinascabrera@hotmail.com
#General Discuss#
Hi Everyone I am pretty new to electronics and have the first Arduino project that I would like to move off the breadboard. finding this site has been a real find as I searched the internet on making your own PCB's, I have followed the tutorials and read through the forum. I have created my first schematic, all I want to do is create a pcb that removes all the wiring between my MUX74HC4067, provides 5 volt access for the switches and gathers all the Grounds together.
Questions
Have I made a silly mistake
Do I need to show the switches (I don't think so)
How do I show the 5 volt power that all the switches will wire into with power provided from the 5 volt pin off the arduino.
Sorry if my terminology is off all help is greatly appreciated.
Link to project my first schematic
thanks
JaseMilly
My project suddenly started to display numerous DRC errors.
I left my project with no DRC errors about two weeks ago but since I accessed it in the last Friday, May 25th, numerous DRC errors are displayed regardless of DRC settings.
These are pad-to-pad and track-to-pad errors with no apparent reason.
Some of these DRC errors seem to be associated with elements crossing or located within solid-region-cutout objects introduced to prevent copper fill in certain areas.
Other DRC errors seem to be associated with a specific package PG-TDSON-8 in two possible ways: certain pads of package overlaps each other or package's pads interfere with introduced thermal vias.
I followed thread 'False DRC errors' but the version V5.5.8 does not solve my problem.
The project is not public, please tell if you need it sent to support@easyeda.com.
Hello community,
I have designed a PCB which has a little proto area. This area has ~15*20 holes similar to THIS. The distance between the holes are 100mil, the diameters are 40mil with 40mil pad (so both the width and the height are 80mil each).
My design is rejected by JLCPCB claiming that the "holes are too close to each other and there will be a scratch during manufacturing".
I'm surprised as 100mil is standard, each thruhole IC has the same drill distance. Was it because the pads are too wide? What is JLCPCB limitation here, I couldnt locate anything on their website. Unfortunately no further explanation were given except that I should try ENIG (which I'd like to avoid due to the costs).
Please help me out.
Thanks.






