Hello!
So I am trying to do a faceplate using text and graphics, exposing copper in a PCB, and I have some issues (and lack of knowledge).
I found this topic (https://easyeda.com/forum/topic/expose-coper-of-text-object-8a343e5137464bf997da75568d7ff2e7) and this is what I did:
1- the faceplate is this, three holes for potentiometers (grey ones) and outlines in purple. The text and symbol I am testing:

2- so I added 2x copies of each text AND graphic. One of each to "Top Layer":

3- and the other on "Top Solder Mask Layer":

Now the question is, what do I do next??
Mind that this is not a "electronic schematic", it's just a design. Should I add a "net" (GND for example)????
Thank you for your help!
#Skill#I don't know if this is possible but on my sketch I have used some Arduino layout for example:
https://easyeda.com/modules/ARDUINO-PRO-MICRO_37f84fd49e0046a2b8c6c3bacf1395e1
I would like to add female pinheaders to hold it to the board which are assembled on it at manufacturing like this:

I checked the library chosing JLCPCB assembled there are similar connectors like HDR-TH_9P-P2.54-V-F-1 but if I would to use these then I would have to delete the Arduino layout and put these to where it's pins are so my question is:
Isn't there an easier way you can replace them with these type of connectors still using the original library?
Also I have a bunch of regular round shape holes what I just placed with "P" on the board and will serve as male pin headers like these:

isn't there an easy way to replace them with these pin headers without deleting them finding something in the library and replacing them?
Also 1 final question about the BOM: will everything in the BOM with JLCPCB partnumber be pick and placed on the board? I ask because I have used layouts with referring parts but I don't want all of those to be added to the final assembly just the connectors what I select, how is this works?
Thanks
#General Discuss#Using v6.4.25
I am trying to lay out a 4-layer board with inner layers named 'GND' and 'VCC'.
It appears to me that vias with net named 'GND' connect to both inner planes and vias with net named 'VCC' connect to neither inner plane.
I'm assuming that I am missing something simple and fundamental.
Here's a minimalist example:
https://oshwlab.com/conormcquaid/vcc-plane-test



