Good morning,
I have a PCB designed for Nextion display mounting and I'm having some difficulty with getting JLCPCB to recognize what I'm trying to do.
The display PCB has no traces, only a cutout and a few holes. It does have the JLC serial # positioning on the bottom silk screen layer.
I want just want blue solder mask front and back (and the back silk screen). However, nothing I've tried gets JLC to display the Gerber with solder mask. I tried copper fill, but that didn't help.
I've read https://easyeda.com/forum/topic/Gerber-Generator-not-creating-bottom-solder-mask-properly-a0b2833339464b73851aa60237c8e157, but between the "do this - don't do this," I haven't made much headway getting JLC to properly display the Gerber I've uploaded.
Any suggestions on how to get EasyEDA/JLC to do this would be much appreciated.
This is the panel -

I know, I love it too.
Thanks.
Jim
#PCB#I'm trying to lay out a HAT for a Pi and wanted to use some solder jumper to make CS and IRQ lines configurable with a default.
sample project: https://easyeda.com/beikeland/solderjumper-test
JUMPER-PAD-2-NC_BY_TRACE
and
JUMPER-PAD-2-NOYES_SILK
was selected as they came with or without a trace to close the gap - but this confuses the autorouter and design rules as I can have two different net names on both cases, and even if I use the same net name for the NC one it still is confused. Are there other jumper parts that allows a me to use different net names with a default closed or will I need to use an open and hope a solder paste layer will form the bride and also place them on the layer I want assembled?


As the title says, I need to export an Altium file to EasyEDA. Now I know that EasyEDA can import Altium files that are in ASCII format, but I can't find how to save the files as ASCII in Altium (I downloaded the trial). I tried to export as .dxf in Altium but the polylines came as seperate. I then joined the lines in the dxf file in AutoCAD, but when I tried to import it again, the lines were still seperate.
Any ideas on how I could import my files so that they would come out as they should (lines connected, and if possible, with pads that are already filled). Or can I connect the lines in EasyEDA?
I'll add some explanatory photos.
This is how it looks in Altium: https://imgur.com/R60KXzT
In AutoCAD the lines were joined manually: https://imgur.com/Fp2305f
In EasyEDA the lines are still seperate (I held the cursor on the arc): https://imgur.com/r7XQwgx
Long story short, I want to import my file to EasyEDA such that it would come out just like it is in Altium.
#PCB#Hi guys,
The auto-backup function seems to be broken. I've put it on a 10 minute interval (first picture), which has worked (more or less) until 2 days ago, but yesterday it didn't work anymore (second picture).


So after the problem I reported yesterday ( Everything moves... ) I just wanted to go back to the previous backup and discovered that that function seems to be broken; I only have a backup from before all the changes I made and one from after the disaster, with all the components moved off the grid.
BR//Willem.
#Bug Reports#The Voltage_Source_V_Behavioral_Source in EELib is not a B source. It is an independent V Source.

It is netlisted as an Independent V Source:

AND it has "AC {amplitude} {phase}" appended to it (see https://easyeda.com/forum/topic/AC-Analysis-broken-because-AC-1-is-incorrectly-appended-to-ALL-Voltage-sources-4a0c5d9b028048a98b3bb9b3b6df0567)
The same problem exists with the and this is netlisted as an Independent Current I Source:

I1 I1_1 I1_2 B(SIN(1))
This is a B Source:

There are already symbols with associated LTspice models here:

- I will update their descriptions from ngspice to LTspice and their tags but please do not delete any of the symbols in this Spice Source section.
Thanks.
#Bug Reports#AC Analysis is broken because "AC 1 0" is being incorrectly appended to ALL Voltage sources ignoring how they are configured in the schematic.
This is an example simulation but all simulation netlists I have looked at recently show the same bug.
https://easyeda.com/editor#mode=sim\,id=|8aae27aaf8d64096b407367892960681
Adding "AC {amplitude} {phase}" to a voltage source enables it to be used as the signal source for an AC Analysis and normally it is this source and this source only that is then used for creating a Bode or frequency response plot. There are occasions where more then one source may be used but that is very unusual.
- The choice of which source to append "AC {amplitude} {phase}" to has to be left up to the user and MUST not be automated. In particular it must NOT be appended in such a way that the user cannot see or edit it!
Hello,
I want to make a PCB with a computer power connector. In the bookstores I don't find a connector but I could find one elsewhere on the easyeda site: https://easyeda.com/component/3a02ebca990740de90408bc56a3b5083
I can open it in the editor but I don't see how to put it on my diagram. If I copy / paste when I want to convert to PCB it is not seen in the components and therefore I have errors.
Thanks for your help.













