I've started putting footprint information on schematics - its an option in EasyEDA schematic capture thats disabled by default. I'm doing this because of errors i've made where a part's footprint was not what i wanted and it sneaked through to manufactured boards, and almost impossible to fix then. I now add a check item during schematic capture QA to look at all footprints on the schematic to ensure the correct part was selected. But EasyEDA has a problem that has persisted through many versions and is still present in version V6.2.46

EasyEDA does not keep the footprint information text box in a position that I move it to, it always returns the text box to the default position that EasyEDA uses when you first place the schematic symbol. This text gets put on top of other components or text that I have placed in that default position. HOWEVER - only multi-part components are affected - single components eg a transistor or resistor are NOT affected.


The trigger for this is if I make any change to the pcb layout - place a wire, move a component, save - any action it seems.
An example project that demonstrates this behaviour is here https://easyeda.com/editor#id=|c344d65e2f724c4792b4cf2a26ad7f90|d9478f22b2c8465b9e2e20e2151299d5
#Bug Reports#Hi all, I finally completed my latest PCB design but have 3 DRC errors which I cannot find/clear. They are clearance errors located at J2 pins 3 4 and 5. Anyone care to have a look at it for me to see what I'm missing please. The projest can be found here https://easyeda.com/bobbuckfield/mes_tsma2 if that's the right thing to do. Cheers.
Edit.
All sorted, I had drawn the PCB symbol using the top layer rather than the top silk layer. I''l get the hang of it eventually I'm sure LOL.
#PCB#As discussed in this post: https://easyeda.com/forum/topic/Why-use-multi-layer-pad-if-the-pad-has-no-hole-38c373982d65409d8f8a100265939479
For the sake of consistency, I would like my own user created schematics and footprints to be displayed in the "User Contributed" class when searching the library. It appears they are displayed there for everybody except the creator.
#Feature Requests#Hello guys i have created a schematic and a pcb design of Esp32-Wroom connected with mpu6050 with on board battery connector, usb to uart,micro usb and voltage regulator and some more.. I want to know how to check if there is error in the schematic and also how to do a simulation for a circuit as big as this(searched online and no one seems to be simulating this types of circuitry), Here is the project.
Thanks..
I'm verifying a user-contributed decal for a TC2030-MCP-FP Tag-Connect connector. The six connector pads are designed as multi-layer, but they have no holes (hole diameter is set to 0).
What will the resulting 2-layer PCB look like in this case? Will I have two matching sets of pads on the top and bottom layer, but with no connection through the board? As discussed in this post: https://easyeda.com/forum/topic/Multi_layer_pads_not_connected-jXtnFyQ8q In that case it would just be a waste of real estate on the other side, wouldn't it?
(If on the other hand it IS possible to make a pad that is connected through the board with no hole, I guess this would be preferable as it would be more durable: Repeated connect-disconnects of the connector could wear out the thin copper layer. Perhaps)
On a similar note, one of the six pads are not like the others... It's not plated, while the others are. However if there is no hole through the pad, this setting has no effect, correct?
#PCB#









