"Out of Stock"

Out of Stock
I know what it means. It would be nice to have some more information about it.

For example the INA181A3:
https://lcsc.com/product-detail/PMIC-Current-Power-Monitors-Regulators_TI_INA181A3IDBVT_INA181A3IDBVT_C129285.html

I ordered it 1 month ago. Now I would like to order some more, but it is "out of stock". I think there are different possibilities:
- you already ordered some more
- you will order them only if there is someone that will order something like 10000 pieces
- you will probably never order them anymore
- discontinued on your store

I can wait also 6-12 months or check on other stores, if I know that you will have them in the store again. But since I don't want them for a production, I will only buy something like 10-50, not more.

There are 2 nice features you could implement in this case:
1. Give more info about this "out of stock"\, so I know if it is better to change my PCB design with other components or just wait.
2. Add the option "alert me if this component is available again"\, so I will receive an email once it is available.

Just an idea.

#General Discuss#
Technical Discussion
How to create a capacitive touch pad

A copper area used for a capacitive touch contact must be covered by Solder Mask and therefore also does not require a Paste Mask aperture.

The recommended process in EasyEDA for anything that is on or forms an integral part of the PCB is to:

  1. first create and save a named PCB Footprint and then
  2. to create and save a Schematic symbol with the same name and having the named PCB Footprint assigned to the Package attribute of the symbol.

The problem is that if a PCB Footprint for such a contact is made using the Solid Region tool to define the copper area then attempting to route a track to it will cause DRC errors when it is pulled into in a PCB from it's associated Schematic Symbol.

This is because a Solid Region can not be assigned a pad number.

The recommended EasyEDA procedure for creating anything copper in a PCB Footprint it to use only Pads.

A Solid Region can be converted to a pad, which solves the pad number assignment problem but the problem then is that copper over Pads is automatically assigned an aperture in the Solder Mask and Paste Mask layers over it.

  • However, there is a way to remove these apertures over a pad.

Since the update to EasyEDA V6.2 it is possible to set a negative Solder and Paste Mask expansion.

A positive expansion increases the radius or width/height of the aperture.

A negative expansion reduces the radius or width/height of the aperture.

For circular pads of diameter D, the expansion must be equal to at least -D/2.

For rectangular pads the negative expansion only needs to be at least half of the smallest dimension.

Irregularly shaped pads may require some experimentation to reduce the aperture to zero.

It is possible to set a negative expansion of greater than that required to reduce the aperture to zero

For example, a circular pad with a 60mil diameter then specifying a SolderMask and a PasteMask expansion of -30mil for both apertures will reduce the aperture to zero.

Covered pads created this way must be checked by generating and inspecting them in Gerber form using gerbv.

#Skill#
Circuit Design