Hi there,
I have a sort of (dumb) question. But I did a copper pour for two ground planes. My board has all headers, with no components, and one XHC connector.
Do I have to connect the GND pins of my headers? Or if they are through holes is that enough (sort of like a via)?
here is a picture example of my board:

It's kind of a should no question, I just notice that even when I auto-routed it would not connect these pins with any tracks.
Project URL: https://easyeda.com/jcfor3ver/Zone-Stand
It is the ZoneStand PCB
Thank you!
Trying to use autoroute but I keep getting the error: "Network error! Please check your network and try again!"
Here is my project: https://easyeda.com/editor#id=|161b1d98adff4f8ca30f665241fce613|c15fa915dafc43dab3e26d5900de0aff|4e9ad8655af5427985b97e93c0bccf29
It is the "Zonestand PCB"
I am wondering if it has to do with the shape of the board. Although I cannot change this shape as it is essential to my project.
#PCB#For example UNO_R3_SHIELD from System library:

but when swapped to the bottom layer, the multi-layer pads swap but the Document layer graphics do not:

A better way to see the effect is to place this footprint into a PCB then swap it from top to bottom:
https://easyeda.com/component/49eaeefd7a104d6b8e6773a7159802b1
Top layer:


Bottom layer:


Hi,
I wanted to try to create an extension, but I ran into the error "extId is required" as soon as I call api('createCommand', { ... }).
I copied the code fromhttps://github.com/dillonHe/EasyEDA-Documents/blob/master/API/example/theme/main.js and pasted it into Tools -> Extensions -> Run Script.
Also tried this simple code in Tools -> Extensions -> Run Script:
api('createToolbarButton', {
title:'Shape',
fordoctype:'pcb',
"menu" : [
{"text":"Log Selection", "cmd":"extension-debugshape-log"},
]
});``api('createCommand', {
'extension-debugshape-log' : function() {
console.log(api('getSelectedIds'));
}
});
Toolbar button shows up, but same error on createCommand
Since I found no documentation ... what is wrong?
#Bug Reports#









