misunderstanding of word "Library"

I finally figured out why everyone gets so confused with parts in EasyEDA - you are totally mis-using the word "Library".

One of your tutorials says "In EasyEDA, “Schematic Library” & “Schematic Symbol” & “SCH Lib”
& “Part” & “Component” & “SchematicLib” are the same, they
all be called as schematic library;
“Package” & “footprint” &
“PCB Library” & “PCB Lib” & “PCBLib” & “Patten” are the
same, they all be called as PCB library."

This is completely incorrect and very confusing.  A library is a container of a multitude of things, it is NOT a part or a symbol.  If your town has a library, it is a building that contains a bunch of books, it is NOT called a book, and the things you read on the shelves inside are NOT called libraries.  Maybe there is some translation problem with the word Library that is confusing you, you are not using it like other CAD systems do.

So try to answer this questions about EasyEDA:  I am a consultant and I do designs for several different companies.  They each have a set of parts they want to use for everything.  So when I work for Company A, I must use only parts that are approved by them.  So I need to use a LIBRARY of parts approved by Company A.  When I work for company B, I need to use a different set of parts.  So I would switch PART LIBRARIES and use a completely different SET OF PARTS, which means a different PARTS LIBRARY for Company B.  How can I set up EasyEDA to have different groups of parts (which is called a LIBRARY) so I can use only one group of parts and no others?  It looks like the only LIBRARY of parts you have for this right now is called Personal.  I need to split the Personal LIBRARY into several libraries that have different sets of parts in them.  When I select "New Schematic Symbol Library", I expect it to create a new directory that will contain a bunch of schematic symbols.  I would name it "Company A Parts" and move parts into it.  I would expect a new library to show up in the left list with the name "Company A Parts".  That is what a PART LIBRARY is.

If you fix this terminology, I guarantee you, the number of users of this software will go way up.  Hours are wasted by every new user trying to figure this out.

-E

#General Discuss#
Others
Arduino MEGA Shield Project

Greetings,

I need the team's advice to know if I am on the right track to designing an Arduino MEGA "shield", or if the approach I've used will yield a useless result.  Is there a better, more sensible approach?

I am designing an Arduino MEGA "shield" - the PCB is populated with modules and components on the TOP side, and Male Header pins are populated on the BOTTOM side of the PCB, into which the Arduino MEGA plugs.

  • The top side works fine; you just place components per usual.
  • In order to place the Arduino MEGA on the bottom side of the PCB it needs to be placed "upside down" from the perspective that EasyEDA normally takes.  When EasyEDA places a component on the bottom side the component is automatically Flipped, expecting that the bottom side of the component will be mounted to the bottom side of the PCB.  In the case of a "shield" I need to mount the top side of the component (Arduino Mega) to the bottom side of the PCB.  In order to accomplish this the PCB Layout of the Arduino MEGA needs to be Flipped in the 'X' direction.  Otherwise all the pins/connections are backwards and the Arduino MEGA will not fit.  Unfortunately, EasyEDA does not support Flipping of PCB components.

So, what I am doing is telling EasyEDA that I am leaving the Arduino MEGA on the TOP side of the PCB.  This places all the pins in the correct locations and orientation; the male headers, when later added to the BOTTOM side, will plug right into the Arduino MEGA.  However, all the other modules and components are ALSO on the TOP side, so they are all superimposed on top of the Arduino MEGA.

As you can imagine, this creates lots of DRC errors.  This means that I will not be able to benefit from the automated DRC checks - I will have to carefully check everything manually, hoping that I don't overlook something (this turned out not to be the case; error checking works great!).  In order to help with this I have created a Layout Prototype using a PCB Breadboard to check that everything fits.  BTW, I have also "stacked" a couple of things on the TOP side of the PCB - but I am less concerned about these, as they are much simpler to check.

Here is a picture of what I've described - hopefully this helps visualize the approach:
Arduino MEGA Shield Project.jpg

Here's the segment of the PCB showing the messy result of the superimposed modules/components/Arduino MEGA:
Arduino MEGA Shield PCB.jpg

What say you all?

Best Regards,
Ron Brinkman

BTW - I Love, Love, Love EasyEDA.  It's unbelievably capable.

#PCB#
Circuit Design
How to associate the .subckt to a New Spice Symbol

Hi all,

I would like to create a new schematic symbol with a model, so it can be simulated, but I'm not able to complete the task:

  • I can see my symbol if I open Libraries and search for for IRLB3813PBF, although I'm not sure if it is visible for other people, as it appers under Personal.
  • If I place my symbol, it comes all complete with the spice text, which is not very practical.
  • I believe that I have to specify somewhere the spice prefix, but I can't find where.

The component I want to create is the IRLB3813PBF, by Infineon:

This is what I've done so far:

  1. From the menu, I've created a New Spice Symbol.
  2. I've drawn something that looks like a MOSFET, with a circle and three pins.
  3. I've assigned the TO-220AB(TO-220-3) package.
  4. I've numbered the pins according the the PCB package
  5. I've created a new Text area, and specified in its properties that it is a spice text.
  6. I've downloaded the spice model, which is a .SUBCKT, and pasted into the Text area. For this I've double-clicked on the text to open the multi-line text editor, so as to avoid the carriage-return to collapse.
  7. I've updated the spice number of the pins according to the inputs in the spice model.
  8. I've saved the symbol and specified the manufacturer reference, the provider and a link.

I've read the following tutorials:

Any help would be greatly appreciated.

Regards,
Jean-Michel

#Simulation#
Circuit Design