In "PCB Layout", "Help: component autoplacement into PCB", you can read my request. Immediate response and of great help to me.
Handyfierman asked to insert the PCB I asked for help for. I attach my PCB:
I have placed the 6 components in the center and the 6 cable connection points at the edges by hand, as I need to be in this position. Then I will position the others, only by moving them within the board.
In "https://usuaris.tinet.cat/fmco/s88_en.html#S88", you can see the wiring diagram and the board I started from.
For any other questions, I'm here,
Dario
At the moment, a Schematic Symbol and its associated PCB Footprint is assumed to be for a single component or device.
The headers for modules like the ESP-32, WEMOS D1 or the Teensy 4.0 and so on are made up of two separate single row pin header strips and not as a single item such as the double row sockets like those used for example for 40 pin DIP devices.
At the moment there is no easy way to make a Schematic Symbol that can call up two separate components in the BOM and indicate that the Footprint requires more than one physical component to be fitted to the board.
The process I described in:
https://easyeda.com/forum/topic/How-do-I-leave-the-labels-but-remove-the-parts-53430c692d204cb9be915c4d095988ec
deals with this problem but is quite complicated and difficult to follow.
For anyone having trouble following the procedure then the simplest option may be to just place the symbol for the module on the schematic which will pull the associated footprint into the PCB. Then manually edit the BOM to show that two single row headers must be bought as well as the WEMOS D1 module and that the headers must be fitted to the board and not the module itself.
Alternatively, the attributes for the symbol in the Schematic can be edited to show the supplier information for the required header in the BOM and then a second, duplicated set of supplier information is added to the symbol to show a second identical header to indicate that two headers are required.
Neither of these two solutions are very clear and error proof.
It would be good if some way could be introduced to easily annotate the symbol to clearly show that the footprint is made up from - and therefore requires the placement of - more than one physical component on the PCB.





