Hello peeps,
I have been working on a 10mA constant cource that supplies atleast 5V at output. I have been using the LM317 regulator for creating the constant current source of 10mA but the voltage drop is too high. I read in the datasheet of LM317 that it has a 1.25V drop. I have been using a 9V DC input. I have attached the datasheet for LM317, the spice models I have created as well for your reference. It would be great if anyone could help me sort out the problem. I need to arrive at a circuit that outputs 5V at 10mA. Any help and comments are appreciated much.
Thank you
LM317 Datasheet
Hi
DXF pop up used to allow you to set what is in the DXF file, with this feature removed or bug users are forced to edit DXF again in another application if they just want to make 3D object from PCB.
DXF feature used to work like explained in here https://docs.easyeda.com/en/PCB/Export-DXF/index.html and I think that would be better for using DXF files.
Update: I think I am going crazy or the holes are not being exported at all.
Thank you,
Ali
Hi, I am working on the claw machine PCB, again. I was wondering why this error showed up on both of my projects: "Incomplete Connection, please check." I have wired everything (except the ground of everything, which I will use a GND pour with), but the 12V net and the 5V net is showing incomplete for some reason. But, the rest is fine. So, I don't know.
V13's Schematic
Version 13 Claw Machine PCB
Version 13.1 Claw Machine PCB
Thanks,
Austin
#Bug Reports#Hello,
I'm trying to create a circuit that will light an LED when the PG (Power Good) pin of a switcher IC (specifically TPS54394) goes high. I would appreciate some help finding logic-level MOSFETs in the JLCPCB Assemley Library.
In addition, I am not sure what the voltage level is of the PG signal (is it 5V, or is it the output voltage of the power supply, something else?). The voltage supplies I'm designing will be outputting 1.0V, 1.2V, and 3.3V. I understand that this question maybe outside the scope of this forum but if anyone knows the answer I would appreciate hearing from you.
Thank you.




