Greetings fellow PCB enthusiasts.
My project can be found at https://oshwlab.com/quickstar77/a-bunch-of-mosfet
https://easyeda.com/editor#id=|bb97d55e8eb845549517a8ae0046d747|4249db11c9f44a77883ffddf7457e06e|2f5c6bc133cb48c2809af2b4e8f8a3cb
It's purpose is to allow me to control simple LED lights based on a 3.3V High from a Teensy 4.0.
I took a MOSFET circuit example and multiplied it by 12. Then I added RJ-45 Jacks to act as power cable to a remote LED.
My questions are;
Am I using the Resistors Correctly?
Does a design this simple need to worry about capacitors?
For those who've designed functional circuits before does anything jump out as being "wrong"?
I have a functional prototype of this design but I used a different FET so I picked out this one based on its similarities to the one I was using but I might've missed a detail.
Thank you
-Nathan
Guys,
I realized that easyeda couldn't export schematics to Ki-CAD after designing a very huge schematics. I want to know any other alternative or workaround to reduce my work of re-producing the same PCB in Ki-CAD. Pleasee pleasseee do show me some way to convert my easyeda's schematics capture to Ki-Cad.
here is my easyeda JSON file that has to converted into Ki-CAD schematic. Pleaseee show me some way.
https://drive.google.com/file/d/1VknbkYHZ3OjN7CX52RdKmbvpBdjsnuUm/view?usp=sharing
#Schematic#Hi,
I would ask if in the future versions you will consider a more precise customization of "spoke" pad connection. Actually there is only the possibility to specify a fixed width or accept the default width when width is equal to 0 (which is this formula?). However, it would be nice to specify the percentage wrt the pad size. Maybe it could be similarly implemented like the "teardrop" menu.




I can't find the SMT type option in EasyEDA and so I can't design any PCB. Can someone help me on getting that option back? And what is this Paste type option in the place of the SMT type option?
